| № | Name | A* | Part number |
|---|---|---|---|
| 300 | PROPELLER SHAFT Replaced by: A 655 410 07 04 |
- | A 395 410 43 04 |
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1455 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 655 410 07 04 |
| 315 | DRIVE FLANGE Replaced by: A 395 411 12 11 |
- | A 395 411 10 11 |
| 315 | DRIVE FLANGE STAGGERED TEETH |
1 | A 395 411 12 11 |
| 318 | UNIVERSAL JOINT CROSS Replaced by: A 940 410 00 31 |
- | A 620 410 00 31 |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
1 | A 940 410 00 31 |
| 321 | GREASE NIPPLE | 1 | N 071412 008302 |
| 324 | LOCK AS REQUIRED 2.00 MM |
4 | A 006 994 31 41 |
| 324 | LOCK AS REQUIRED 2.10 MM |
4 | A 006 994 35 41 |
| 324 | LOCK AS REQUIRED 2.20 MM |
4 | A 006 994 39 41 |
| 336 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 395 413 00 61 |
| 339 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | N 000960 014237 |
| 345 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
4 | N 000934 014020 |
| 400 | INTERMEDIATE BEARING Replaced by: A 655 410 00 22 |
- | A 395 410 06 22 |
| 400 | INTERMEDIATE BEARING INTERMEDIATE SHAFT BEARING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 655 410 00 22 |
| SPACER WASHER PROPELLER SHAFT BEARING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
2 | A 655 411 00 52 | |
| 412 | FLANGE PROPELLER SHAFT BEARING |
1 | A 645 411 00 46 |
| 415 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 395 413 00 61 |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 389 990 00 19 |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 389 411 00 62 |
| 424 | BRACKET PROPELLER SHAFT BEARING,LEFT |
1 | A 617 413 41 42 |
| 427 | BRACKET PROPELLER SHAFT BEARING,RIGHT |
1 | A 617 413 42 42 |
| 430 | SCREW BRACKET TO PROPELLER SHAFT BEARING HOUSING |
4 | N 000961 012106 |
| 433 | LOCK WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
4 | N 912004 012100 |
| 436 | WASHER Replaced by: A 123 242 03 66 |
- | A 329 990 00 40 |
| 436 | WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
2 | A 123 242 03 66 |
| 439 | REINFORCEMENT PROPELLER SHAFT BEARING |
1 | A 395 413 00 11 |
| 442 | SCREW REINFORCEMENT TO BRACKET |
4 | N 000961 012106 |
| 445 | NUT REINFORCEMENT TO BRACKET |
4 | N 913001 012000 |
| 448 | SCREW BRACKET TO CROSS MEMBER |
4 | N 000961 012108 |
| 451 | WASHER Replaced by: A 123 242 03 66 |
- | A 329 990 00 40 |
| 451 | WASHER BRACKET TO CROSS MEMBER |
4 | A 123 242 03 66 |
| 454 | NUT BRACKET TO CROSS MEMBER |
4 | N 910113 012002 |
| 500 | PROPELLER SHAFT Replaced by: A 655 410 05 02 |
- | A 395 410 09 07 |
| 500 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO REAR AXLE 2200 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 655 410 05 02 |
| 515 | DRIVE FLANGE Replaced by: A 395 411 12 11 |
- | A 395 411 10 11 |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 395 411 12 11 |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 940 410 00 31 |
- | A 620 410 00 31 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
2 | A 940 410 00 31 |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 |
| 524 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 31 41 |
| 524 | LOCK AS REQUIRED 2.10 MM |
8 | A 006 994 35 41 |
| 524 | LOCK AS REQUIRED 2.20 MM |
8 | A 006 994 39 41 |
| 527 | SEAL RING PROTECTIVE TUBE 105X17 MM |
1 | A 395 411 00 59 |
| 527 | SEAL RING PROTECTIVE TUBE 102.5X22 MM |
1 | A 000 411 01 59 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 530 | GREASE NIPPLE | 1 | N 071412 008102 |
| 539 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000960 014237 |
| 545 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000934 014020 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy