INJECTION PUMP

EPC / Mercedes / 4 / M / M 372.953 / 07 / 030
‹ ›

№- Name A* Part number A
INJECTION PUMP 001 A 01 607 418 02  -
068 FITTING 006 A 00 007 833 69  -
071 SEAL RING 006 A 01 099 754 48  -
080 SPRING 006 A 00 107 404 93  -
086 VALVE 006 A 00 007 484 84  -
089 PUMP ELEMENT 006 A 00 107 434 22  -
098 GASKET
AS REQUIRED 1.00 MM 		012 A 00 007 484 80  -
098 GASKET
AS REQUIRED 1.05 MM 		012 A 00 007 448 80  -
098 GASKET
AS REQUIRED 1.10 MM 		012 A 00 007 449 80  -
098 GASKET
AS REQUIRED 1.15 MM 		012 A 00 007 450 80  -
098 GASKET
AS REQUIRED 1.20 MM 		012 A 00 007 451 80  -
098 GASKET
AS REQUIRED 1.25 MM 		012 A 00 007 452 80  -
098 GASKET
AS REQUIRED 1.30 MM 		012 A 00 007 453 80  -
098 GASKET
AS REQUIRED 1.35 MM 		012 A 00 007 454 80  -
098 GASKET
AS REQUIRED 1.40 MM 		012 A 00 007 455 80  -
098 GASKET
AS REQUIRED 1.45 MM 		012 A 00 007 456 80  -
098 GASKET
AS REQUIRED 1.50 MM 		012 A 00 007 457 80  -
098 GASKET
1.55 MM 		012 A 00 007 458 80  -
098 GASKET
AS REQUIRED 1.60 MM 		012 A 00 007 459 80  -
098 GASKET
AS REQUIRED 1.65 MM 		012 A 00 007 460 80  -
098 GASKET
AS REQUIRED 1.70 MM 		012 A 00 007 461 80  -
098 GASKET
AS REQUIRED 1.75 MM 		012 A 00 007 462 80  -
098 GASKET
AS REQUIRED 1.80 MM 		012 A 00 007 463 80  -
098 GASKET
AS REQUIRED 1.85 MM 		012 A 00 007 464 80  -
098 GASKET
AS REQUIRED 1.90 MM 		012 A 00 007 465 80  -
098 GASKET
AS REQUIRED 1.95 MM 		012 A 00 007 466 80  -
098 GASKET
AS REQUIRED 2.00 MM 		012 A 00 007 467 80  -
098 GASKET
AS REQUIRED 2.05 MM 		012 A 00 007 468 80  -
098 GASKET
AS REQUIRED 2.10 MM 		012 A 00 007 469 80  -
098 GASKET
AS REQUIRED 2.15 MM 		012 A 00 007 470 80  -
098 GASKET
AS REQUIRED 2.20 MM 		012 A 00 007 471 80  -
098 GASKET
AS REQUIRED 2.25 MM 		012 A 00 007 472 80  -
098 GASKET
AS REQUIRED 2.30 MM 		012 A 00 007 473 80  -
098 GASKET
AS REQUIRED 2.35 MM 		012 A 00 007 474 80  -
098 GASKET
AS REQUIRED 2.40 MM 		012 A 00 007 475 80  -
098 GASKET
AS REQUIRED 2.45 MM 		012 A 00 007 476 80  -
098 GASKET
AS REQUIRED 2.50 MM 		012 A 00 007 477 80  -
098 WASHER
AS REQUIRED 2.55 MM 		012 A 00 107 418 76  -
098 WASHER
AS REQUIRED 2.60 MM 		012 A 00 107 419 76  -
098 WASHER
AS REQUIRED 2.65 MM 		012 A 00 107 420 76  -
098 WASHER
AS REQUIRED 2.70 MM 		012 A 00 107 421 76  -
098 WASHER
AS REQUIRED 2.75 MM 		012 A 00 107 422 76  -
098 WASHER
AS REQUIRED 2.80 MM 		012 A 00 107 423 76  -
098 WASHER
AS REQUIRED 2.85 MM 		012 A 00 107 424 76  -
098 WASHER
AS REQUIRED 2.90 MM 		012 A 00 107 425 76  -
098 WASHER
AS REQUIRED 2.95 MM 		012 A 00 107 426 76  -
101 SEAL RING 006 A 01 299 755 48  -
113 SNAP RING 006 A 00 199 479 35  -
122 SLEEVE 006 A 00 007 415 32  -
128 SPRING 006 A 00 107 435 93  -
140 TAPPET
Replaced by: A  000 074 26 29 		- A 00 007 417 29  -
140 TAPPET 006 A 00 007 426 29  -
146 LOCK 006 A 00 099 405 12  -
158 VALVE 001 A 00 007 476 84  -
164 SPRING 001 A 00 107 406 93  -
170 SEALING RING 001 N 007603 010110 -
173 SEALING RING 002 N 007603 014104 -
212 CONTROL RACK 001 A 00 007 428 26  -
236 SEALING RING
18X22 DIN 7603 		001 N 915035 000001 -
245 STUD 012 A 00 099 097 05  -
284 SEAL RING
16X3 		006 A 00 599 745 48  -
287 PIN 003 A 00 099 118 01  -
290 STUD
TO 016 074 18 02, 026 074 01 02, 67 02 		003 A 00 099 095 05  -
299 BALL BEARING 001 A 00 398 162 25  -
310 SPRING LOCK WASHER 001 N 000127 022201 -
327 CYLINDR. ROLLER BEARING 001 A 00 598 153 01  -
331 SEAL RING 001 A 01 099 769 47  -
357 GASKET 001 A 00 107 407 80  -
359 SEAL RING
Replaced by: A  001 997 26 45 		- A 01 199 729 48  -
359 SEAL RING
Replaced by: A  014 997 61 48 		- A 00 199 726 45  -
359 SEAL RING 001 A 01 499 761 48  -
363 BEARING 001 A 00 007 410 46  -
366 SEAL RING 002 A 00 499 711 40  -
379 SEAL RING
109X2.8 MM 		001 A 00 799 753 48  -
430 GASKET
FUEL PUMP TO INJECTION PUMP TO 016 074 18 02, 026 074 01 02, 67 02 		001 A 00 107 422 80  -
436 SPRING LOCK WASHER 003 N 912004 006102 -
500 TS FUEL PUMP
PARTS KIT 		001 A 00 009 022 50  -
527 SPRING 001 A 00 009 120 15  -
530 SEAL RING 001 A 00 399 782 45  -
533 SEAL RING 001 A 00 299 765 40  -
542 FUEL PUMP
Replaced by: A  000 090 88 50 		- A 00 009 041 50  -
542 FUEL PUMP
(MANUAL FEED PUMP) 		001 A 00 009 088 50  -
569 VALVE
PARTS KIT 		001 A 00 009 002 10  -
575 SEAL RING 002 A 00 099 736 44  -
581 SCREW PLUG 001 A 00 099 707 30  -
593 REPAIR KIT
FUEL PUMP 		001 A 37 409 000 50  -
599 REPAIR KIT
PARTS KIT 		001 A 34 458 672 07  -
605 FILTER ELEMENT
Replaced by: A  000 091 08 40 		- A 00 009 001 51  -
605 FILTER BOWL
PARTS KIT 		001 A 00 009 108 40  -
608 SPRING 001 A 00 099 300 05  -
611 SEAL RING 001 A 00 099 700 40  -
614 CLAMPING BRACKET
FROM FUEL FILTER TO FEED PUMP 		001 A 00 009 112 41  -
626 GASKET KIT
INJECTION PUMP 		001 A 00 007 001 02  -
638 SUPPORT
INJECTION PUMP 		001 A 36 207 601 35  -
641 STUD BOLT
SUPPORT TO INJECTION PUMP M 10X35 		003 N 914131 010100 -
644 WASHER
SUPPORT TO INJECTION PUMP 		003 A 11 699 011 40  -
647 NUT
SUPPORT TO INJECTION PUMP 		003 N 000934 010008 -
650 SEAL RING
Replaced by: A  001 997 26 45 		- A 01 199 729 48  -
650 SEAL RING
Replaced by: A  014 997 61 48 		- A 00 199 726 45  -
650 SEAL RING
SUPPORT TO INJECTION PUMP 		001 A 01 499 761 48  -
653 DRIVE GEAR
Replaced by: A  366 077 02 12 		- A 36 607 700 12  -
653 DRIVE GEAR 001 A 36 607 702 12  -
656 WOODRUFF KEY
DRIVE GEAR TO INJECTION PUMP 		001 N 006888 005006 -
659 SPRING LOCK WASHER
DRIVE GEAR TO INJECTION PUMP 		001 N 000127 018203 -
662 NUT
DRIVE GEAR TO INJECTION PUMP 		001 N 000439 018203 -
663 GASKET
INJECTION PUMP SUPPORT TO TIMING CASE 		001 A 35 207 602 80  -
668 HEXAGON HEAD BOLT
INJECTION PUMP SUPPORT TO TIMING CASE M 8X25 		005 N 304017 008005 -
706 SEALING RING
DELIVERY LINE TO AIR LINE 		002 N 007603 012111 -
709 FITTING
DELIVERY LINE TO MANIFOLD PRESSURE COMPENSATOR 		001 N 915013 006000 -
712 SEALING RING
DELIVERY LINE TO MANIFOLD PRESSURE COMPENSATOR 		001 N 007603 012111 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA