| №- | Name | A* | Part number | A |
|---|---|---|---|---|
| 004 | REAR AXLE AXLE RATIO,1:5.937; PLANETARY GEAR RATIO,1:3.48 |
001 | A 34 635 028 04 | - |
| 004 | REAR AXLE AXLE RATIO,1:5.937; PLANETARY GEAR RATIO,1:3.48 |
001 | A 34 635 029 04 | - |
| 006 | AXLE HOUSING (AXLE CASING) |
001 | A 34 635 065 03 | - |
| 009 | SCREW PLUG OIL FILLING AND OIL DRAIN |
002 | A 35 299 700 32 | - |
| 012 | VALVE Replaced by: A 383 351 00 65 |
- | A 31 235 010 90 | - |
| 012 | FITTING | 001 | A 38 335 100 65 | - |
| 016 | DIFFERENTIAL GEAR Replaced by: A 655 350 03 20 |
- | A 34 635 013 20 | - |
| 016 | DIFFERENTIAL GEAR | 001 | A 65 535 003 20 | - |
| 020 | AXLE HOUSING WITH BEARING CAP |
001 | A 34 635 062 20 | - |
| 022 | CYLINDRICAL PIN BEARING COVER TO AXLE HOUSING |
004 | N 000007 008206 | - |
| 024 | SCREW BEARING COVER TO AXLE HOUSING |
004 | A 94 299 016 04 | - |
| 027 | PIN BEARING COVER |
002 | A 35 535 000 55 | - |
| 030 | SNAP RING | 002 | N 912009 025100 | - |
| 033 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 34 635 081 23 | - |
| 033 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 39 335 020 23 | - |
| 036 | SCREW | 012 | A 34 699 025 01 | - |
| 036 | SCREW Replaced by: A 000 990 67 04 |
- | N 914112 014312 | - |
| 036 | SCREW | 012 | A 00 099 067 04 | - |
| 039 | DIFFERENTIAL SPIDER | 001 | A 34 635 304 20 | - |
| 042 | DIFFERENTIAL PINION Replaced by: A 387 350 00 40 |
- | A 34 635 306 14 | - |
| 045 | BUSHING | 004 | A 34 635 309 50 | - |
| 048 | SPACER RING Replaced by: A 346 353 32 51 |
- | A 34 635 325 51 | - |
| 048 | SPACER RING | 004 | A 34 635 332 51 | - |
| 051 | SPHERICAL WASHER DIFFERENTIAL PINION |
004 | A 34 635 301 24 | - |
| 054 | SIDE GEAR Replaced by: A 387 350 00 40 |
- | A 34 635 303 15 | - |
| 057 | THRUST WASHER Replaced by: A 346 353 22 62 |
- | A 34 635 305 62 | - |
| 057 | THRUST WASHER SIDE GEAR |
002 | A 34 635 322 62 | - |
| 061 | REPAIR KIT Replaced by: A 387 350 00 40 |
- | A 38 758 600 35 | - |
| 061 | REPAIR KIT DIFFERENTIAL GEAR |
001 | A 38 735 000 40 | - |
| 064 | RING GEAR AND PINION RATIO: 29:17 |
001 | A 34 635 021 39 | - |
| 064 | RING GEAR AND PINION RATIO: 29:17 |
001 | A 34 635 026 39 | - |
| 067 | SCREW RING GEAR TO DIFFERENTIAL CASE |
016 | A 34 699 013 01 | - |
| SCREW Replaced by: A 346 990 31 01 |
- | A 34 699 030 01 | - | |
| 067 | SCREW Replaced by: A 346 990 32 01 |
- | A 34 699 031 01 | - |
| 067 | SCREW Replaced by: A 346 990 31 01 |
- | A 34 699 032 01 | - |
| 067 | SCREW RING GEAR TO DIFFERENTIAL CASE |
016 | A 34 699 031 01 | - |
| 070 | LOCK RING GEAR TO DIFFERENTIAL CASE |
001 | A 34 635 300 73 | - |
| 073 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR |
002 | A 00 398 132 05 | - |
| 073 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR |
002 | A 00 398 130 05 | - |
| 073 | ROLLER BEARING DIFFERENTIAL GEAR |
002 | A 00 098 142 18 | - |
| 076 | SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT |
001 | A 34 635 306 25 | - |
| 079 | SET COLLAR DIFFERENTIAL GEAR ADJUSTMENT |
001 | A 34 635 004 43 | - |
| 080 | SEAL RING | 001 | A 34 635 301 60 | - |
| 087 | LOCK SCREW COLLAR TO AXLE HOUSING |
002 | A 34 633 300 73 | - |
| 089 | TOOTHED WASHER SCREW COLLAR TO AXLE HOUSING |
002 | N 006797 008120 | - |
| 091 | SCREW SCREW COLLAR TO AXLE HOUSING |
002 | N 000933 008131 | - |
| 096 | HOUSING THROUGH DRIVE |
001 | A 34 635 303 07 | - |
| 099 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 398 131 05 | - |
| 099 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 398 129 05 | - |
| 099 | ROLLER BEARING ON PINION END |
001 | A 00 098 143 18 | - |
| 102 | BUSHING 60.00 MM |
001 | A 34 635 303 50 | - |
| 102 | SPACER BUSHING 62.40 MM |
001 | A 94 235 301 42 | - |
| 105 | WASHER AS REQUIRED 1.60 MM |
001 | A 94 235 301 77 | - |
| 105 | WASHER AS REQUIRED 1.70 MM |
001 | A 94 235 311 77 | - |
| 105 | WASHER AS REQUIRED 1.80 MM |
001 | A 94 235 321 77 | - |
| 105 | WASHER AS REQUIRED 1.90 MM |
001 | A 94 235 331 77 | - |
| 105 | WASHER AS REQUIRED 2.00 MM |
001 | A 94 235 341 77 | - |
| 105 | WASHER AS REQUIRED 2.10 MM |
001 | A 94 235 351 77 | - |
| 105 | WASHER AS REQUIRED 2.20 MM |
001 | A 94 235 361 77 | - |
| 105 | WASHER AS REQUIRED 2.30 MM |
001 | A 94 235 371 77 | - |
| 105 | WASHER AS REQUIRED 2.40 MM |
001 | A 94 235 381 77 | - |
| 105 | WASHER AS REQUIRED 2.50 MM |
001 | A 94 235 391 77 | - |
| 105 | WASHER AS REQUIRED 2.60 MM |
001 | A 94 335 301 77 | - |
| 105 | SPACER RING Replaced by: A 346 353 09 51 |
- | A 34 635 328 51 | - |
| 105 | SPACER RING Replaced by: A 346 353 09 51 |
- | A 34 635 329 51 | - |
| 105 | SPACER RING AS REQUIRED 4.30MM |
001 | A 34 635 327 51 | - |
| 105 | SPACER RING AS REQUIRED 4.40 MM |
001 | A 34 635 310 51 | - |
| 105 | SPACER RING AS REQUIRED 4.50 MM |
001 | A 34 635 312 51 | - |
| 105 | SPACER RING AS REQUIRED 4.60 MM |
001 | A 34 635 320 51 | - |
| 105 | SPACER RING AS REQUIRED 4.70 MM |
001 | A 34 635 322 51 | - |
| 105 | SPACER RING AS REQUIRED 4.80 MM |
001 | A 34 635 314 51 | - |
| 105 | SPACER RING AS REQUIRED 4.90 MM |
001 | A 34 635 316 51 | - |
| 105 | SPACER RING AS REQUIRED 5.00 MM |
001 | A 34 635 317 51 | - |
| 105 | SPACER RING AS REQUIRED 5.10 MM |
001 | A 34 635 319 51 | - |
| 108 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 598 105 05 | - |
| 108 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 398 170 05 | - |
| 108 | ROLLER BEARING ON PINION END |
001 | A 00 098 141 18 | - |
| 108 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 598 148 05 | - |
| 108 | TAPERED ROLLER BEARING ON PINION END |
001 | A 00 598 136 05 | - |
| 111 | CYLINDRICAL PIN | 002 | N 000007 012107 | - |
| 114 | GEAR NUMBER OF TEETH: 30 |
001 | A 34 635 300 85 | - |
| 117 | NUT Replaced by: A 385 351 05 72 |
- | A 34 635 300 72 | - |
| 117 | NUT Replaced by: A 946 351 00 72 |
- | A 38 535 105 72 | - |
| 117 | NUT | 001 | A 94 635 100 72 | - |
| 120 | GROOVED BALL BEARING Replaced by: N 000000 000759 |
- | N 000625 036216 | - |
| 120 | BALL BEARING REAR |
001 | N 000000 000759 | - |
| 123 | COVER THROUGH DRIVE |
001 | A 34 635 302 08 | - |
| 126 | GROOVED BALL BEARING FRONT |
001 | N 000625 036313 | - |
| 129 | DIFFERENTIAL GEAR Replaced by: A 343 350 07 23 |
- | A 34 635 095 23 | - |
| 129 | DIFFERENTIAL GEAR (REPAIR KIT,THRU DRIVE) |
001 | A 34 335 007 23 | - |
| 132 | SHAFT THROUGH DRIVE |
001 | A 34 635 303 35 | - |
| 135 | THRUST WASHER AS REQUIRED 4.20 MM |
001 | A 34 635 326 62 | - |
| 135 | THRUST WASHER Replaced by: A 346 353 17 62 |
- | A 34 635 303 62 | - |
| 135 | THRUST WASHER AS REQUIRED 4.00 MM |
001 | A 34 635 317 62 | - |
| 135 | THRUST WASHER Replaced by: A 346 353 18 62 |
- | A 34 635 310 62 | - |
| 135 | THRUST WASHER AS REQUIRED 3.85 MM |
001 | A 34 635 318 62 | - |
| 135 | THRUST WASHER Replaced by: A 346 353 20 62 |
- | A 34 635 311 62 | - |
| 135 | THRUST WASHER AS REQUIRED 3.65 MM |
001 | A 34 635 320 62 | - |
| WHEEL HUB DRIVE WHEEL HUB DRIVE |
001 | A 34 635 013 24 | - | |
| 138 | BUSHING | 001 | A 34 635 304 50 | - |
| 138 | BUSHING | 001 | A 34 635 308 50 | - |
| 141 | FOLLOWER Replaced by: A 346 353 11 36 |
- | A 34 635 308 36 | - |
| 141 | FOLLOWER LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 34 635 311 36 | - |
| 145 | GEAR Replaced by: A 343 350 08 23 |
- | A 34 635 303 85 | - |
| 148 | DIFFERENTIAL CASE | 001 | A 34 635 005 27 | - |
| 151 | SCREW DIFFERENTIAL CASE M 12X80 |
012 | N 308676 012022 | - |
| 154 | UNIVERSAL JOINT | 001 | A 34 635 001 28 | - |
| 157 | DIFFERENTIAL PINION Replaced by: A 343 350 08 23 |
- | A 34 635 305 14 | - |
| 160 | SPHERICAL WASHER | 004 | A 34 635 302 24 | - |
| 163 | NUT | 001 | A 34 635 301 26 | - |
| 166 | BUSHING | 001 | A 34 635 306 50 | - |
| 166 | BUSHING | 001 | A 34 635 310 50 | - |
| 169 | SIDE GEAR Replaced by: A 343 350 08 23 |
- | A 34 635 305 15 | - |
| 170 | REPAIR KIT | 001 | A 34 335 008 23 | - |
| 172 | THRUST WASHER Replaced by: A 346 353 24 62 |
- | A 34 635 307 62 | - |
| 172 | THRUST WASHER 2.35 MM |
001 | A 34 635 324 62 | - |
| 172 | THRUST WASHER 2.45 MM |
001 | A 34 635 327 62 | - |
| 172 | THRUST WASHER Replaced by: A 346 353 25 62 |
- | A 34 635 308 62 | - |
| 172 | THRUST WASHER 2.60 MM |
001 | A 34 635 325 62 | - |
| 172 | THRUST WASHER 2.80 MM |
001 | A 34 635 328 62 | - |
| 175 | SHAFT SHIFTING ROD |
001 | A 34 635 305 35 | - |
| 178 | SHIFTING FORK LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 35 535 302 34 | - |
| 181 | SPRING LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 34 699 309 01 | - |
| 184 | HEADLESS SETSCREW LONGITUDINAL DIFFERENTIAL LOCK |
001 | N 000551 010020 | - |
| 187 | NUT LONGITUDINAL DIFFERENTIAL LOCK |
001 | N 304035 010000 | - |
| 190 | GASKET LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 35 535 302 80 | - |
| 195 | PISTON LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 34 635 301 57 | - |
| 197 | SEAL RING LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 00 199 722 45 | - |
| 201 | GASKET LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 35 535 303 80 | - |
| 204 | COVER LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 34 635 304 08 | - |
| 206 | SCREW SHIFTING CYLINDER TO AXLE HOUSING |
003 | N 000931 008246 | - |
| 210 | SCREW COLLAR THROUGH DRIVE SHAFT SETTING |
001 | A 34 635 308 25 | - |
| 213 | SEAL RING ON BEARING END |
001 | A 01 099 736 46 | - |
| 213 | SEAL RING ON BEARING END |
001 | A 01 099 754 46 | - |
| 216 | SEAL RING ON FLANGE END |
001 | A 00 799 799 46 | - |
| 216 | SEAL RING ON FLANGE END |
001 | A 00 999 711 46 | - |
| 219 | LOCK SCREW COLLAR TO AXLE HOUSING |
001 | A 35 235 300 73 | - |
| 222 | TOOTHED WASHER SCREW COLLAR TO AXLE HOUSING |
001 | N 006797 008120 | - |
| 225 | SCREW SCREW COLLAR TO AXLE HOUSING |
001 | N 000933 008212 | - |
| 234 | NUT FLANGE TO SHAFT |
001 | A 94 635 100 72 | - |
| 236 | SCREW Replaced by: A 942 990 13 04 |
- | N 000961 014063 | - |
| 236 | SCREW PINION HOUSING TO REAR AXLE HOUSING M 14X40 |
012 | A 94 299 013 04 | - |
| 237 | SCREW PLUG OIL FILLING AND OIL DRAIN,THROUGH DRIVE |
002 | A 35 299 700 32 | - |
| 241 | SCREW COVER TO DIFFERENTIAL CASE |
016 | N 000961 012122 | - |
| 244 | SEAL HOLDER Replaced by: A 942 353 01 17 |
- | A 34 635 303 58 | - |
| 244 | CONNECTOR THROUGH DRIVE |
001 | A 94 235 301 17 | - |
| 247 | SPACER WASHER AS REQUIRED 0.10 MM |
001 | A 34 635 309 52 | - |
| 247 | SPACER WASHER AS REQUIRED 0.15 MM |
001 | A 34 635 310 52 | - |
| 247 | SPACER WASHER AS REQUIRED 0.20 MM |
001 | A 34 635 311 52 | - |
| 247 | SPACER WASHER AS REQUIRED 0.35 MM |
001 | A 34 635 312 52 | - |
| 247 | SPACER WASHER AS REQUIRED 0.50 MM |
001 | A 34 635 313 52 | - |
| 247 | SPACER WASHER AS REQUIRED 1.00 MM |
001 | A 34 635 314 52 | - |
| 247 | SPACER WASHER AS REQUIRED 1.50 MM |
001 | A 34 635 316 52 | - |
| 250 | PIN PINION HOUSING TO REAR AXLE HOUSING |
001 | A 35 599 700 10 | - |
| 253 | SCREW PINION HOUSING TO REAR AXLE HOUSING M 14X60 |
012 | N 308676 014005 | - |
| 304 | SEAL RING REAR AXLE HOUSING TO AXLE CASING |
NB | A 34 633 400 59 | - |
| 307 | SCREW Replaced by: A 355 990 06 04 |
- | A 00 099 062 04 | - |
| 307 | SCREW AXLE HOUSING ON AXLE SUPPORT M 12X40 |
018 | A 35 599 006 04 | - |
| SCREW Replaced by: A 355 990 07 04 |
- | A 00 099 063 04 | - | |
| SCREW AXLE HOUSING ON AXLE SUPPORT M 12X85 |
002 | A 35 599 007 04 | - | |
| 310 | SHAFT THROUGH DRIVE |
001 | A 34 635 304 35 | - |
| 313 | SCREW COLLAR THROUGH DRIVE SHAFT SETTING |
001 | A 34 635 309 25 | - |
| 316 | SEAL RING ON FLANGE END |
001 | A 00 899 722 46 | - |
| 316 | SEAL RING ON FLANGE END |
001 | A 00 999 715 46 | - |
| 319 | SEAL RING ON PINION END |
001 | A 00 799 747 47 | - |
| 319 | SEAL RING ON PINION END |
001 | A 00 799 751 47 | - |
| 322 | GROOVED BALL BEARING ON PINION END |
001 | N 000625 036212 | - |
| 325 | LOCK PLATE THROUGH DRIVE SHAFT SETTING |
001 | N 070952 060102 | - |
| 328 | NUT Replaced by: A 674 356 02 26 |
- | N 070852 060000 | - |
| 328 | GROOVED NUT THROUGH DRIVE SHAFT SETTING |
001 | A 67 435 602 26 | - |
| 331 | LOCK SCREW COLLAR TO AXLE HOUSING |
001 | A 35 235 300 73 | - |
| 334 | TOOTHED WASHER SCREW COLLAR TO AXLE HOUSING |
001 | N 006797 008120 | - |
| 337 | SCREW SCREW COLLAR TO AXLE HOUSING |
001 | N 000933 008212 | - |
| 340 | WHEEL HUB Replaced by: A 625 356 00 01 |
- | A 34 635 613 01 | - |
| 340 | WHEEL HUB STEEL |
002 | A 62 535 600 01 | - |
| 340 | WHEEL HUB CASTING |
002 | A 62 535 601 01 | - |
| 340 | WHEEL HUB Replaced by: A 346 356 11 01 |
- | A 34 635 608 01 | - |
| 340 | WHEEL HUB Replaced by: A 625 356 01 01 |
- | A 34 635 611 01 | - |
| 340 | WHEEL HUB Replaced by: A 625 356 01 01 |
- | A 34 635 610 01 | - |
| 343 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 00 498 121 05 | - |
| 343 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 00 498 149 05 | - |
| 343 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 00 798 100 05 | - |
| 346 | OIL COLLECTOR | 002 | A 34 635 600 82 | - |
| 349 | TAPERED ROLLER BEARING INSIDE |
002 | A 00 498 107 05 | - |
| 349 | TAPERED ROLLER BEARING INSIDE |
002 | A 00 498 109 05 | - |
| 349 | TAPERED ROLLER BEARING INSIDE |
002 | A 00 598 121 05 | - |
| 349 | TAPERED ROLLER BEARING INSIDE |
002 | A 00 898 135 05 | - |
| 361 | COVER PLATE | 002 | A 34 635 600 27 | - |
| 364 | SEAL RING Replaced by: A 013 997 59 47 |
- | A 01 199 712 46 | - |
| 364 | SEAL RING INSIDE |
002 | A 01 399 759 47 | - |
| 364 | SEAL RING Replaced by: A 013 997 94 47 |
- | A 01 199 701 46 | - |
| 364 | SEAL RING Replaced by: A 013 997 94 47 |
- | A 01 199 752 47 | - |
| 364 | SEAL RING Replaced by: A 013 997 94 47 |
- | A 01 399 788 47 | - |
| 364 | SEAL RING Replaced by: A 020 997 39 47 |
- | A 01 399 794 47 | - |
| 367 | SEAL RING Replaced by: A 013 997 05 47 |
- | A 00 399 766 47 | - |
| 367 | SEAL RING Replaced by: A 013 997 05 47 |
- | A 01 199 700 46 | - |
| 367 | SEAL RING Replaced by: A 020 997 39 47 |
- | A 01 399 705 47 | - |
| 367 | SEAL RING Replaced by: A 016 997 56 47 |
- | A 01 199 753 47 | - |
| 367 | SEAL RING Replaced by: A 020 997 39 47 |
- | A 01 699 756 47 | - |
| 367 | SEAL RING WHEEL HUB, INSIDE |
002 | A 02 099 739 47 | - |
| 367 | SEAL RING Replaced by: A 016 997 56 47 |
- | A 01 199 744 46 | - |
| 370 | THRUST RING Replaced by: A 346 356 14 15 |
- | A 34 635 603 15 | - |
| 370 | THRUST RING WHEEL BEARING |
002 | A 34 635 614 15 | - |
| 373 | OIL COLLECTOR WHEEL BEARING |
002 | A 34 635 601 82 | - |
| 376 | WHEEL MOUNTING BOLT | 020 | A 38 140 107 71 | - |
| 379 | SUPPORT PLANETARY GEAR TRAIN |
002 | A 34 635 411 09 | - |
| 382 | OUTSIDE GEAR Replaced by: A 346 354 14 12 |
- | A 34 635 404 12 | - |
| 382 | OUTSIDE GEAR NUMBER OF TEETH: 57 |
002 | A 34 635 414 12 | - |
| 382 | OUTSIDE GEAR NUMBER OF TEETH: 89 |
002 | A 34 635 426 12 | - |
| 382 | OUTSIDE GEAR NUMBER OF TEETH: 85 |
002 | A 34 635 430 12 | - |
| 382 | OUTSIDE GEAR NUMBER OF TEETH: 85 |
002 | A 34 635 443 12 | - |
| 385 | LOCK RING | 002 | N 000472 230000 | - |
| 388 | GROOVED NUT Replaced by: A 942 356 00 26 |
- | A 35 535 601 26 | - |
| 388 | GROOVED NUT HUB AND SUPPORT TO AXLE CASING |
002 | A 94 235 600 26 | - |
| 388 | GROOVED NUT HUB AND SUPPORT TO AXLE CASING |
002 | A 94 235 601 26 | - |
| 391 | LOCK PLATE HUB AND SUPPORT TO AXLE CASING |
002 | A 35 535 601 73 | - |
| PLANETARY GEARING | 002 | A 34 635 007 09 | - | |
| PLANETARY GEARING | 002 | A 34 635 017 09 | - | |
| PLANETARY GEARING Replaced by: A 346 350 41 09 |
- | A 34 635 025 09 | - | |
| PLANETARY GEARING | 002 | A 34 635 041 09 | - | |
| 397 | BELL HUB | 002 | A 34 635 015 33 | - |
| 397 | BELL HUB | 002 | A 34 635 057 33 | - |
| 397 | BELL HUB Replaced by: A 346 350 74 33 |
- | A 34 635 067 33 | - |
| 397 | BELL HUB | 002 | A 34 635 074 33 | - |
| 400 | REPAIR KIT Replaced by: A 346 350 04 54 |
- | A 34 658 601 35 | - |
| 400 | PLANET GEAR Replaced by: A 346 350 06 54 |
- | A 34 635 004 54 | - |
| 400 | PLANET GEAR PARTS KIT |
002 | A 34 635 006 54 | - |
| 400 | PLANET GEAR PARTS KIT |
002 | A 65 335 000 54 | - |
| 400 | PLANET GEAR PARTS KIT |
002 | A 65 235 000 54 | - |
| 403 | THRUST WASHER | 010 | A 35 535 401 62 | - |
| 406 | THRUST WASHER | 020 | A 35 535 404 62 | - |
| 409 | GUARD PLATE SUN GEAR,INSIDE |
002 | A 34 633 600 62 | - |
| 412 | SCREW Replaced by: A 624 354 00 71 |
- | A 35 535 403 71 | - |
| 412 | SCREW BELL HUB TO PLANETARY GEARING |
010 | A 62 435 400 71 | - |
| 415 | SEAL RING PLANETARY GEAR TRAIN TO REAR WHEEL HUB |
002 | A 00 199 768 48 | - |
| 415 | SEAL RING PLANETARY GEAR TRAIN TO REAR WHEEL HUB |
002 | A 00 299 742 48 | - |
| 418 | SCREW PLANETARY GEAR TRAIN TO REAR WHEEL HUB |
010 | N 000912 012047 | - |
| 421 | REAR AXLE SHAFT Replaced by: A 346 357 17 01 |
- | A 34 635 707 01 | - |
| 421 | REAR AXLE SHAFT Replaced by: A 346 357 18 01 |
- | A 34 635 717 01 | - |
| 421 | REAR AXLE SHAFT Replaced by: A 658 357 07 01 |
- | A 34 635 718 01 | - |
| 421 | REAR AXLE SHAFT LESS INTERLOCK SERRATIONS |
002 | A 65 835 707 01 | - |
| 424 | SNAP RING | 002 | N 009045 050001 | - |
| 427 | SUN GEAR | 002 | A 34 635 404 17 | - |
| 427 | SUN GEAR | 002 | A 34 635 417 17 | - |
| 427 | SUN GEAR | 002 | A 34 635 424 17 | - |
| 430 | LOCK RING | 002 | N 900055 045200 | - |
| 433 | GUARD PLATE | 002 | A 34 633 600 62 | - |
| 436 | SPACER WASHER AS REQUIRED 0.10 MM |
001 | A 35 535 407 52 | - |
| 436 | SPACER WASHER AS REQUIRED 0.20 MM |
001 | A 35 535 406 52 | - |
| 436 | SPACER WASHER AS REQUIRED 0.50 MM |
001 | A 35 535 405 52 | - |
| 436 | SPACER WASHER AS REQUIRED 1.50 MM |
001 | A 49 835 401 52 | - |
| 439 | LOCK RING Replaced by: N 000472 105001 |
- | N 000472 105000 | - |
| 439 | LOCK RING | 002 | N 000472 105001 | - |
| 442 | END COVER Replaced by: A 624 356 00 20 |
- | A 34 633 403 20 | - |
| 442 | HUB CAP BELL HUB |
002 | A 62 435 600 20 | - |
| 443 | GASKET Replaced by: A 650 356 01 80 |
- | A 34 633 400 80 | - |
| 443 | GASKET | 002 | A 65 035 601 80 | - |
| 445 | SCREW COVER TO BELL HUB M 10X22 |
020 | N 000933 010164 | - |
| 445 | SCREW COVER TO BELL HUB M 10X18 |
020 | A 00 099 064 04 | - |
| 448 | SEAL RING OIL DRAIN 24X29 MM |
002 | N 007603 024106 | - |
| 451 | SEAL RING OIL FILLING 46X52 MM |
002 | N 007603 045100 | - |
| 454 | SCREW PLUG OIL DRAIN |
002 | A 11 599 700 32 | - |
| 457 | SCREW PLUG OIL FILLING |
002 | A 35 599 702 32 | - |
| 456 | FLANGE (COUPLING FLANGE),DIA., 180 MM |
001 | A 34 635 005 45 | - |
| 458 | PROTECTIVE CAP | 001 | A 34 635 300 90 | - |
| 460 | SEAL RING | 001 | N 007603 018101 | - |
| 464 | SWITCH Replaced by: A 001 545 82 14 |
- | A 00 054 542 14 | - |
| 464 | SWITCH LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 00 154 582 14 | - |
| 464 | SWITCH LONGITUDINAL DIFFERENTIAL LOCK |
001 | A 00 154 547 14 | - |
| 472 | COVER DIFFERENTIAL LOCK |
001 | A 35 535 315 45 | - |
| 476 | GASKET DIFFERENTIAL LOCK |
001 | A 35 535 303 80 | - |
| 480 | SCREW COVER TO AXLE HOUSING |
003 | N 000933 008147 | - |
| 484 | UNIT IDENTIFICATION PLATE | 001 | A 35 558 403 24 | - |
| 488 | GROOVED NAIL UNIT IDENTIFICATION PLATE TO REAR AXLE |
002 | N 001476 003007 | - |