RETARDER

EPC / Mercedes / 4 / GM / GM 715.232 / 25 / 070
‹ ›

№- Name A* Part number A
005 GASKET
Replaced by: A  000 257 81 80 		- A 00 025 736 80  -
005 GASKET
Replaced by: A  000 257 87 80 		- A 00 025 781 80  -
005 GASKET
Replaced by: A  000 257 89 80 		- A 00 025 787 80  -
005 GASKET
CONVERTER HOUSING,REAR 		001 A 00 025 789 80  -
008 HOUSING
Replaced by: A  000 257 21 32 		- A 00 025 713 32  -
008 HOUSING
RETARDER 		001 A 00 025 721 32  -
011 SCREW
Replaced by: N 000933 008337 		- N 000933 008116 -
011 SCREW
Replaced by: A  009 990 01 01 		- N 000933 008337 -
011 SCREW
RETARDER HOUSING TO CONVERTER HOUSING M 8X28 		011 A 00 999 001 01  -
011 SCREW
RETARDER HOUSING TO CONVERTER HOUSING M 8X45 		008 N 000931 008244 -
014 HEXAGON HEAD BOLT
RETARDER HOUSING TO TIMING CASE M 8X25 		003 N 304017 008034 -
014 HEXAGON HEAD BOLT
RETARDER HOUSING TO TIMING CASE M 8X35 		003 N 304017 008018 -
017 SCREW
RETARDER HOUSING TO CONVERTER HOUSING M 10X40 		001 N 000912 010064 -
020 SPRING WASHER
Replaced by: N 000137 008212 		- N 000137 008204 -
020 SPRING WASHER
RETARDER HOUSING TO CONVERTER HOUSING 		019 N 000137 008212 -
020 SPRING WASHER
RETARDER HOUSING TO TIMING CASE 		006 N 000137 008212 -
023 SPRING WASHER
RETARDER HOUSING TO CONVERTER HOUSING 		001 N 000137 010205 -
026 RING
(STATOR) 		001 A 00 025 701 19  -
029 SLEEVE
STATOR 		001 A 00 025 700 31  -
032 SCREW
RING TO RETARDER HOUSING 		020 N 000912 008012 -
035 SPRING LOCK WASHER
Replaced by: N 912006 008000 		- N 007980 008003 -
035 SPRING LOCK WASHER
RING TO RETARDER HOUSING 		020 N 912006 008000 -
038 IMPELLER
Replaced by: A  000 257 29 05 		- A 00 025 721 05  -
038 IMPELLER
RETARDER 		001 A 00 025 729 05  -
041 PISTON RING
PUMP GEAR 		002 A 00 025 703 59  -
044 WASHER
PUMP GEAR 		001 A 00 025 712 76  -
047 ROLL PIN
PUMP GEAR 		002 N 001481 004049 -
050 HOUSING
CONTROL 		001 A 00 025 714 32  -
050 HOUSING
CONTROL 		001 A 00 025 715 32  -
053 CAP
HOUSING 		001 N 000443 014001 -
056 DOWEL PIN
Replaced by: A  000 997 61 10 		- A 00 099 171 60  -
056 PIN
TIMING CASE TO RETARDER HOUSING 12X60 MM 		002 A 00 099 761 10  -
059 SEAL RING
TIMING CASE TO RETARDER HOUSING 		001 A 01 399 784 47  -
062 GASKET
Replaced by: A  000 257 82 80 		- A 00 025 737 80  -
062 GASKET
Replaced by: A  000 257 88 80 		- A 00 025 782 80  -
062 GASKET
Replaced by: A  000 257 90 80 		- A 00 025 788 80  -
062 GASKET
TIMING CASE TO RETARDER HOUSING 		001 A 00 025 790 80  -
065 HEXAGON HEAD BOLT
TIMING CASE TO RETARDER HOUSING M 8X50 		028 N 304017 008028 -
065 SCREW
Replaced by: N 304017 008053 		- N 000931 008248 -
065 HEXAGON HEAD BOLT
TIMING CASE TO RETARDER HOUSING M 8X60 		001 N 304017 008053 -
068 HEXAGON HEAD BOLT
Replaced by: N 304014 008001 		- N 304014 008004 -
068 HEXAGON HEAD BOLT
TIMING CASE TO RETARDER HOUSING M 8X70 		001 N 304014 008001 -
071 SPRING WASHER
Replaced by: N 000137 008212 		- N 000137 008204 -
071 SPRING WASHER
TIMING CASE TO RETARDER HOUSING 		030 N 000137 008212 -
074 SCREW
TIMING CASE TO RETARDER HOUSING M 10X90 		001 N 007984 010038 -
074 SCREW
TIMING CASE TO RETARDER HOUSING M 10X95 		003 N 000912 010164 -
077 WASHER
TIMING CASE TO RETARDER HOUSING 		004 N 001440 010002 -
080 SCREW
TIMING CASE TO RETARDER HOUSING M 10X80 		005 N 000835 010125 -
083 STUD
TIMING CASE TO RETARDER HOUSING M 10X155,20/75 		006 A 00 199 030 05  -
083 STUD
Replaced by: A  001 990 37 14 		- A 00 199 031 05  -
083 SCREW
TIMING CASE TO RETARDER HOUSING M 10X155,15/75 		001 A 00 199 037 14  -
083 STUD
Replaced by: A  001 990 38 14 		- A 00 199 032 05  -
083 SCREW
TIMING CASE TO RETARDER HOUSING M 10X155,20/20 		009 A 00 199 038 14  -
083 STUD
TIMING CASE TO RETARDER HOUSING M 10X155 		001 A 00 199 010 05  -
086 NUT
Replaced by: N 913017 010003 		- A 00 399 075 51  -
086 NUT
TIMING CASE TO RETARDER HOUSING 		009 N 913017 010003 -
104 SPRING
RETARDER CONTROL 202 MM 		001 A 00 899 323 01  -
104 SPRING
RETARDER CONTROL 250 MM 		001 A 00 599 375 01  -
107 SLEEVE VALVE
RETARDER CONTROL 		001 A 00 025 700 86  -
110 PISTON
RETARDER CONTROL 		001 A 00 025 705 42  -
113 GUIDE RING
RETARDER CONTROL
Replaced by: A  000 252 05 50 		002 A 00 025 702 29  -
113 PILOT BUSHING
RETARDER CONTROL 		002 A 00 025 205 50  -
116 GASKET
FLANGE TO TIMING CASE 		001 A 00 025 749 80  -
119 FLANGE
RETARDER CONTROL 		001 A 00 025 703 45  -
122 SCREW
Replaced by: N 000933 008337 		- N 000933 008116 -
122 SCREW
Replaced by: A  009 990 01 01 		- N 000933 008337 -
122 SCREW
FLANGE TO TIMING CASE M 8X28 		002 A 00 999 001 01  -
125 SPRING WASHER
Replaced by: N 000137 008212 		- N 000137 008204 -
125 SPRING WASHER
FLANGE TO TIMING CASE 		002 N 000137 008212 -
128 SEALING RING
TEMPERATURE SENDER UNIT 		001 N 007603 014106 -
131 SENDER UNIT
Replaced by: A  014 542 04 17 		- A 01 254 203 17  -
131 SENDER UNIT
OIL TEMPERATURE 		001 A 01 454 204 17  -
134 PIPE
RETARDER CONTROL 		001 A 00 025 707 66  -
137 SEALING RING
PIPE TO CONVERTER LOCK-UP COUPLING 		002 N 007603 016103 -
140 BANJO BOLT
PIPE TO CONVERTER LOCK-UP COUPLING 		001 N 915036 012203 -
143 SWIVEL FITTING
PIPE TO CONVERTER LOCK-UP COUPLING
Replaced by: A  001 997 34 73 		001 A 00 699 776 72  -
143 SWIVEL FITTING
PIPE TO CONVERTER LOCK-UP COUPLING 		001 A 00 199 734 73  -
146 SEAL RING
CONVERTER TO BELL HOUSING 		001 A 01 399 727 48  -
149 SHAFT
Replaced by: A  000 250 05 22 		- A 00 025 006 22  -
149 SHAFT
DRIVE 		001 A 00 025 005 22  -
152 NEEDLE BEARING
REAR DRIVE SHAFT 		001 A 00 598 131 10  -
155 SEAL RING
REAR DRIVE SHAFT 		001 A 00 399 760 47  -
158 R-RING
FRONT DRIVE SHAFT 		002 N 034110 055000 -
161 WASHER
DRIVE SHAFT;AS REQUIRED 0.70 MM 		001 A 00 299 054 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 0.80 MM 		001 A 00 299 053 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 0.90 MM 		001 A 00 299 052 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.00 MM 		001 A 00 299 051 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.10 MM 		001 A 00 299 050 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.20 MM 		001 A 00 299 049 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.30 MM 		001 A 00 299 048 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.40 MM 		001 A 00 299 047 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.50 MM 		001 A 00 299 046 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.60 MM 		001 A 00 299 045 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.70 MM 		001 A 00 299 044 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.80 MM 		001 A 00 299 043 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 1.90 MM 		001 A 00 299 042 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.00 MM 		001 A 00 299 063 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.10 MM 		001 A 00 299 062 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.20 MM 		001 A 00 299 061 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.30 MM 		001 A 00 299 060 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.40 MM 		001 A 00 299 059 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.50 MM 		001 A 00 299 058 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.60 MM 		001 A 00 299 057 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.70 MM 		001 A 00 299 056 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.80 MM 		001 A 00 299 055 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 2.90 MM 		001 A 00 299 064 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.00 MM 		001 A 00 299 065 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.10 MM 		001 A 00 299 066 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.20 MM 		001 A 00 299 067 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.30 MM 		001 A 00 299 068 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.40 MM 		001 A 00 299 069 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.50 MM 		001 A 00 299 070 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.60 MM 		001 A 00 299 071 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.70 MM 		001 A 00 299 072 40  -
161 WASHER
DRIVE SHAFT;AS REQUIRED 3.80 MM 		001 A 00 299 073 40  -
164 SCREW
CONVERTER TO DRIVE SHAFT 		001 A 00 099 006 19  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA