| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | FRONT SPRING (PARABOLIC SPRING);NUMBER OF LEAVES: 2 UP TO IDENT NO. 240084 + FROM IDENT NO 500001-556499 EXCEPT FOR FROM IDENT NO. 655871-690172 ONLY FOR USE WITH FRONT AXLE 730.403 |
002 | A 601 320 06 02 |
| 005 | FRONT SPRING FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 601.361,362,366,367,371,372,376,377: FROM IDENT NO. 240114-499999 ALSO INSTALLED ON 234163 601.371,372,376,377: 556500 899081-941503 ONLY WITH OM601/OM602 ENGINE USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON FROM IDENT NO. 240085-499999 + FROM IDENT NO. 556500 ALSO INSTALLED ON FROM IDENT NO. 655871-690172 NOT FOR USE WITH FRONT AXLE 730.403 FROM IDENT NO. 500001-556499 ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION Replaced by: A 602 320 26 02 |
- | A 602 320 03 02 |
| 005 | FRONT SPRING (PARABOLIC SPRING);NUMBER OF LEAVES: 2 FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 152920 -240113 AND 500001-556499, P 000001 |
002 | A 602 320 26 02 |
| 008 | SCREW ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
002 | N 004626 010132 |
| 008 | SCREW FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 152920 -240113 AND 500001-556499, P 000001 |
002 | N 004626 010128 |
| 011 | WASHER Replaced by: N 000125 010532 |
- | N 000125 010518 |
| 011 | WASHER SPRING BOLT |
002 | N 000125 010532 |
| 014 | NUT Replaced by: N 304032 010002 |
- | N 000934 010009 |
| 014 | HEXAGON NUT SPRING BOLT ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
002 | N 304032 010002 |
| 014 | NUT SPRING BOLT FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 152920 -240113 AND 500001-556499, P 000001 |
002 | N 913004 010006 |
| 017 | RIVET SPRING CLAMP TO SPRING LEAF UP TO IDENT N.214755 FOR STATION WAGON;214988 WITH 270-DEG.DOOR; 215405 FOR DELIVERY VAN + FROM IDENT N.500 001-533 590 EXHAUST STOCK OF OLD PART NUMBERS FIRST FROM CHASSIS 500001 - 592810 P 000001 |
002 | N 910006 008022 |
| SHIM FRONT 45X110X0.8 MM COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM |
002 | A 601 322 01 84 | |
| SHIM REAR 45X80X0.8 MM COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM |
002 | A 601 322 02 84 | |
| 020 | THRUST WASHER RUBBER MOUNT UP TO IDENT N.214755 FOR STATION WAGON;214988 WITH 270-DEG.DOOR; 215405 FOR DELIVERY VAN + FROM IDENT N.500 001-533 590 EXHAUST STOCK OF OLD PART NUMBERS FIRST FROM CHASSIS 500001 - 592810 P 000001 |
004 | A 601 321 00 62 |
| 023 | SPRING CLAMP Replaced by: A 611 321 01 33 |
- | A 601 321 04 33 |
| 023 | SPRING CLAMP UP TO IDENT N.214755 FOR STATION WAGON;214988 WITH 270-DEG.DOOR; 215405 FOR DELIVERY VAN + FROM IDENT N.500 001-533 590 EXHAUST STOCK OF OLD PART NUMBERS FIRST FROM CHASSIS 500001 - 592810 P 000001 TO BE ADAPTED DURING ASSEMBLY |
002 | A 611 321 01 33 |
| 026 | BUSHING | 004 | A 000 321 00 50 |
| 026 | BUSHING | 004 | A 000 321 01 50 |
| 026 | BUSHING | 004 | A 000 321 03 50 |
| 029 | SCREW FRONT SPRING TO FRONT SPRING FRONT BRACKET |
002 | N 000960 012332 |
| 032 | HEXAGON NUT FRONT SPRING TO FRONT SPRING FRONT BRACKET |
002 | N 910113 012002 |
| 035 | SHACKLE Replaced by: A 601 320 04 63 |
- | A 601 320 05 63 |
| 035 | SHACKLE FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 240084; FROM IDENT NO. 500001-556499, P 000001 213576-240084 + FROM IDENT NO. 533802-556499 P 000001 Replaced by: A 601 320 08 63 |
- | A 601 320 04 63 |
| 035 | SHACKLE FRONT SPRING TO FRONT-SPRING REAR BRACKET |
002 | A 601 320 08 63 |
| 038 | BUSHING | 002 | A 000 321 00 50 |
| 038 | BUSHING | 002 | A 000 321 01 50 |
| 038 | BUSHING | 002 | A 000 321 03 50 |
| 041 | SCREW SHACKLE TO FRAME |
002 | N 000960 012332 |
| 044 | HEXAGON NUT SHACKLE TO FRAME |
002 | N 910113 012002 |
| 047 | SCREW SPRING TO SHACKLE |
002 | N 000960 012331 |
| 050 | HEXAGON NUT SPRING TO SHACKLE |
002 | N 910113 012002 |
| 053 | SHIM AS REQUIRED 6.32 MM ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 601 321 03 84 |
| 053 | SHIM AS REQUIRED 7.15 MM ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 601 321 04 84 |
| 053 | SHIM AS REQUIRED 7.98 MM ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 601 321 00 84 |
| 053 | SHIM AS REQUIRED 8.81 MM ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 601 321 05 84 |
| 053 | SHIM AS REQUIRED 9.64 MM ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 601 321 06 84 |
| 053 | SHIM AS REQUIRED FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 152920 -240113 AND 500001-556499, P 000001 |
001 | A 601 321 08 84 |
| 056 | PLATE FRONT SPRINGS TO FRONT AXLE |
002 | A 601 320 02 35 |
| 059 | CLAMP FRONT SPRINGS TO FRONT AXLE ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
004 | A 601 322 02 25 |
| 059 | CLAMP FRONT SPRINGS TO FRONT AXLE FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 152920 -240113 AND 500001-556499, P 000001 |
004 | A 601 322 05 25 |
| 062 | HEXAGON NUT FRONT SPRINGS TO FRONT AXLE |
008 | N 910113 012002 |
| 065 | RUBBER BUFFER Replaced by: A 601 322 02 44 |
- | A 601 322 00 44 |
| 065 | RUBBER BUFFER FRONT SPRINGS TO FRONT AXLE |
002 | A 601 322 02 44 |
| 065 | RUBBER BUFFER FRONT SPRINGS TO FRONT AXLE |
002 | A 601 322 03 44 |
| 068 | PIN RUBBER BUFFER TO FRAME |
002 | A 601 321 01 74 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy