| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | STEERING KNUCKLE FRONT LEFT WITH SHAFT FLANGE AND COVER PANEL |
001 | A 246 332 01 00 |
| 010 | STEERING KNUCKLE FRONT RIGHT WITH SHAFT FLANGE AND COVER PANEL |
001 | A 246 332 02 00 |
| 015 | STEERING KNUCKLE FRONT LEFT |
001 | A 246 332 05 01 |
| 015 | STEERING KNUCKLE FRONT RIGHT |
001 | A 246 332 06 01 |
| 020 | ANGULAR CONTACT BALL BRG. FRONT LEFT |
001 | A 246 981 00 06 |
| 020 | ANGULAR CONTACT BALL BRG. FRONT RIGHT |
001 | A 246 981 00 06 |
| 030 | FUSE FRONT LEFT |
001 | A 201 994 16 41 |
| 030 | FUSE FRONT RIGHT |
001 | A 201 994 16 41 |
| 040 | SHAFT FLANGE FRONT LEFT |
001 | A 246 337 01 45 |
| 040 | SHAFT FLANGE FRONT RIGHT |
001 | A 246 337 01 45 |
| 045 | CENTRIFUGAL SEPARATOR OUTSIDE LEFT MERCEDES-BENZ |
001 | A 246 337 00 59 |
| 045 | CENTRIFUGAL SEPARATOR OUTSIDE RIGHT MERCEDES-BENZ |
001 | A 246 337 00 59 |
| 050 | SCREW W RND. HEXAL. HEAD SIDE SHAFT TO FLANGE, LEFT M16X1,5X58 |
001 | A 002 990 13 03 |
| 050 | SCREW W RND. HEXAL. HEAD SIDE SHAFT TO FLANGE, RIGHT M16X1,5X58 |
001 | A 002 990 13 03 |
| 060 | PLUG FRONT LEFT |
001 | A 168 357 00 89 |
| 060 | PLUG FRONT RIGHT |
001 | A 168 357 00 89 |
| 070 | CONTROL ARM LEFT Replaced by: A 246 330 47 00 |
001 | A 246 330 17 07 |
| 070 | CONTROL ARM LEFT |
001 | A 246 330 47 00 |
| 070 | CONTROL ARM RIGHT Replaced by: A 246 330 48 00 |
001 | A 246 330 18 07 |
| 070 | CONTROL ARM RIGHT |
001 | A 246 330 48 00 |
| 070 | CONTROL ARM LEFT |
001 | A 156 330 01 00 |
| 070 | CONTROL ARM RIGHT |
001 | A 156 330 02 00 |
| 080 | WISHBONE BUSHING FRONT LEFT THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 246 333 01 00 |
001 | A 246 333 00 14 |
| 080 | METAL BEARING ELEMENT FRONT LEFT |
001 | A 246 333 01 00 |
| 080 | WISHBONE BUSHING FRONT RIGHT THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 246 333 02 00 |
001 | A 246 333 02 14 |
| 080 | METAL BEARING ELEMENT FRONT RIGHT |
001 | A 246 333 02 00 |
| 080 | METAL BEARING ELEMENT FRONT LEFT |
001 | A 246 333 05 14 |
| 080 | METAL BEARING ELEMENT FRONT RIGHT |
001 | A 246 333 06 14 |
| 100 | HEXAGON HEAD BOLT COMFORT BEARING TO TRANSVERSE CONTROL ARM, LEFT M14X1.5X90 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 005 990 59 00 |
001 | N 910105 014016 |
| 100 | HEXAGON HEAD BOLT COMFORT BEARING TO TRANSVERSE CONTROL ARM, LEFT M14X1,5X94 |
001 | A 005 990 59 00 |
| 100 | HEXAGON HEAD BOLT COMFORT BEARING TO TRANSVERSE CONTROL ARM, RIGHT M14X1.5X90 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 005 990 59 00 |
001 | N 910105 014016 |
| 100 | HEXAGON HEAD BOLT COMFORT BEARING TO TRANSVERSE CONTROL ARM, RIGHT M14X1,5X94 |
001 | A 005 990 59 00 |
| 110 | THREAD FORMING SCREW BEARING TO LONGITUDINAL MEMBER, LEFT M10X28 |
001 | A 000 990 66 11 |
| 110 | THREAD FORMING SCREW BEARING TO LONGITUDINAL MEMBER, RIGHT M10X28 |
001 | A 000 990 66 11 |
| 120 | HEXAGON NUT TRANS. CON. ARM TO STEER. KNUCK. LEFT M14X1,5 Replaced by: N 000000 008261 |
001 | N 000000 003281 |
| 120 | HEXAGON NUT TRANS. CON. ARM TO STEER. KNUCK. LEFT M14X1.5 Replaced by: A 005 990 50 50 |
001 | N 000000 008261 |
| 120 | HEXAGON NUT W FLANGE TRANS. CON. ARM TO STEER. KNUCK. LEFT M14X1,5 |
001 | A 005 990 50 50 |
| 120 | HEXAGON NUT TRANS. CON. ARM TO STEER. KNUCK. RIGHT M14X1,5 Replaced by: N 000000 008261 |
001 | N 000000 003281 |
| 120 | HEXAGON NUT TRANS. CON. ARM TO STEER. KNUCK. RIGHT M14X1.5 Replaced by: A 005 990 50 50 |
001 | N 000000 008261 |
| 120 | HEXAGON NUT W FLANGE TRANS. CON. ARM TO STEER. KNUCK. RIGHT M14X1,5 |
001 | A 005 990 50 50 |
| 130 | SCREW W RND. HEXAL. HEAD BEARING TO INTEGRAL CARRIER, LEFT M10X100 |
002 | A 001 990 90 03 |
| 130 | SCREW W RND. HEXAL. HEAD BEARING TO INTEGRAL CARRIER, RIGHT M10X100 |
002 | A 001 990 90 03 |
| 140 | NUT BEARING TO INTEGRAL CARRIER, LEFT M10 |
002 | N 000000 008270 |
| 140 | NUT BEARING TO INTEGRAL CARRIER, RIGHT M10 OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A# |
002 | N 000000 003275 |
| 140 | NUT BEARING TO INTEGRAL CARRIER, RIGHT M10 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. ADAPT WIRING HARNESS FOR ASSEMBLY |
002 | N 000000 008270 |
| 150 | SCREW W RND. HEXAL. HEAD BEARING TO INTEGRAL CARRIER, LEFT M14X1,5X125 |
001 | A 001 990 89 03 |
| 150 | SCREW W RND. HEXAL. HEAD BEARING TO INTEGRAL CARRIER, RIGHT M14X1,5X125 |
001 | A 001 990 89 03 |
| 160 | SPACER DISK BEARING TO SUPPORT |
002 | A 220 333 00 76 |
| 170 | CAGE NUT MOUNTING TO FRAME M14X1,5 RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | A 246 990 00 56 |
| 170 | CAGE NUT MOUNTING TO FRAME M14X1,5 IMPORTANT: ALSO ORDER CLUTCH PEDAL COVER |
002 | A 246 990 01 56 |
| 180 | HEXAGON NUT TRACK ROD AT STEERING KNUCKLE, LEFT M14X1,5 Replaced by: N 000000 008261 |
001 | N 000000 003281 |
| 180 | HEXAGON NUT TRACK ROD AT STEERING KNUCKLE, LEFT M14X1.5 Replaced by: A 005 990 50 50 |
001 | N 000000 008261 |
| 180 | HEXAGON NUT W FLANGE TRACK ROD AT STEERING KNUCKLE, LEFT M14X1,5 |
001 | A 005 990 50 50 |
| 180 | HEXAGON NUT TRACK ROD AT STEERING KNUCKLE, RIGHT M14X1,5 Replaced by: N 000000 008261 |
001 | N 000000 003281 |
| 180 | HEXAGON NUT TRACK ROD AT STEERING KNUCKLE, RIGHT M14X1.5 Replaced by: A 005 990 50 50 |
001 | N 000000 008261 |
| 180 | HEXAGON NUT W FLANGE TRACK ROD AT STEERING KNUCKLE, RIGHT M14X1,5 |
001 | A 005 990 50 50 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy