| №- | Name | A* | Part number |
|---|---|---|---|
| 030 | REAR SPRING REAR |
002 | A 230 324 02 04 |
| 040 | SHOCK ABSORBER REAR CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== Replaced by: A 230 326 09 00 |
002 | A 230 326 04 00 |
| 040 | SHOCK ABSORBER REAR CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
002 | A 230 326 09 00 |
| 050 | BOOT | 002 | A 230 323 00 92 |
| 060 | RUBBER BUMPER | 002 | A 230 326 00 68 |
| 070 | SHIM | 002 | A 230 325 00 84 |
| 080 | STEP-BEARING | 002 | A 230 326 00 64 |
| 090 | WASHER | 002 | N 000000 003386 |
| 100 | HEXAGON NUT Replaced by: N 910113 010003 |
002 | N 910113 010002 |
| 100 | HEXAGON NUT M10 |
002 | N 910113 010003 |
| 200 | HYDROPNEUMATIC SPRING LEG REAR LEFT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 230 320 02 13 |
| 200 | HYDROPNEUMATIC SPRING LEG REAR LEFT |
001 | A 230 320 41 38 |
| 200 | HYDROPNEUMATIC SPRING LEG REAR RIGHT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 230 320 05 13 |
| 200 | HYDROPNEUMATIC SPRING LEG REAR RIGHT |
001 | A 230 320 42 38 |
| 210 | ELASTOMERIC CUP REAR LEFT |
001 | A 230 328 00 92 |
| 210 | ELASTOMERIC CUP REAR RIGHT |
001 | A 230 328 00 92 |
| 300 | HYDROPNEUMATIC SPRING LEG REAR LEFT |
001 | A 230 320 33 38 |
| 300 | HYDROPNEUMATIC SPRING LEG REAR RIGHT |
001 | A 230 320 34 38 |
| 310 | SHOCK ABSORBER PROTECTION AGAINST TORSION |
004 | A 230 320 13 30 |
| 320 | NUT SPRING STRUT TO BODY M8 |
004 | N 000000 003175 |
| 320 | NUT SPRING STRUT TO BODY M8 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: N 000000 003175 |
004 | N 000000 005304 |
| 320 | NUT SPRING STRUT TO BODY M8 |
004 | N 000000 003175 |
| 330 | HEXAGON HEAD BOLT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1.5X80 |
002 | N 910105 014017 |
| 330 | HEXAGON HEAD BOLT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1.5X90 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: N 910105 014016 |
002 | N 000000 005290 |
| 330 | HEXAGON HEAD BOLT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1.5X90 |
002 | N 910105 014016 |
| 340 | NUT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1.5 |
002 | N 000000 003277 |
| 340 | NUT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1.5-10 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 002 990 35 54 |
002 | N 000000 005307 |
| 340 | NUT HYDROPNEUMATIC SPRING LEG TO SPRING CONTROL ARM M14X1,5 |
002 | A 002 990 35 54 |
| 910 | CLUTCH PLUNGER POSITION SENSOR LEFT REAR 3-PIN 3-PIN MQS;B22/1 |
001 | A 210 540 21 81 |
| 910 | CLUTCH RIGHT REAR PLUNGER TRAVEL SENSOR 3-PIN MQS;B22/6 |
001 | A 210 540 21 81 |
| 912 | FEMALE CONTACT PLUNGER POSITION SENSOR LEFT REAR 3-PIN 0.5-0.75 MM2 MQS;B22/1 |
NB | A 008 545 63 26 |
| 912 | FEMALE CONTACT RIGHT REAR PLUNGER TRAVEL SENSOR 0.5-0.75 MM2 MQS;B22/6 |
NB | A 008 545 63 26 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy