| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | STEERING BOX ASSEMBLY RACK-AND-PINION STEERING WITH HEAT MAT PAY ATTEN. TO REMOVED AXLE SHAFT; NOT VALID FOR INSERTED.......AX. SHFT |
001 | A 220 460 09 00 |
| 005 | STEERING BOX ASSEMBLY RACK-AND-PINION STEERING FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. NOTE REMOVED AXLE SHAFT, NOT VALID FOR BOLT-ON AXLE SHAFT IMPORTANT: TO IDENT. A 320 070, EXCHANGE IN PAIRS ONLY. |
001 | A 220 460 21 00 |
| 005 | STEERING BOX ASSEMBLY RACK-AND-PINION STEERING ORDER OBJECT NUMBER WITHOUT ES1 UP TO IDENT. NO. A368543 SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 220 460 26 00 |
| 010 | TIE ROD INSIDE LEFT Replaced by: A 230 338 00 15 |
001 | A 220 338 07 15 |
| 010 | TIE ROD INSIDE LEFT |
001 | A 230 338 00 15 |
| 010 | TIE ROD INSIDE RIGHT Replaced by: A 230 338 00 15 |
001 | A 220 338 07 15 |
| 010 | TIE ROD INSIDE RIGHT |
001 | A 230 338 00 15 |
| 015 | TIE ROD OUTSIDE LEFT ONLY REPLACEABLE BY PAIRS |
001 | A 230 330 02 03 |
| 015 | TIE ROD OUTSIDE RIGHT ONLY REPLACEABLE BY PAIRS |
001 | A 230 330 02 03 |
| 020 | HEXAGON NUT OUTSIDE LEFT M14X1.5 |
001 | N 308673 014001 |
| 020 | HEXAGON NUT OUTSIDE RIGHT M14X1.5 |
001 | N 308673 014001 |
| 025 | RUBBER MOUNT RACK-AND-PINION STEERING |
004 | A 220 463 00 66 |
| 030 | SINGLE-EYE CLAMP INSIDE |
002 | A 220 463 01 17 |
| 035 | CLAMP OUTSIDE 15.2-18.5 MM |
002 | A 210 463 08 17 |
| 040 | BOLT M12X1.5 |
002 | A 168 466 00 71 |
| 045 | SEAL RING D = 13 MM |
002 | A 023 997 91 48 |
| 055 | SEAL RING STEERING GEAR HOUSING D = 31.5 MM |
002 | A 024 997 71 48 |
| 057 | BOOT RACK-AND-PINION STEERING |
002 | A 220 463 02 96 |
| 059 | SEAL RING STEERING GEAR HOUSING OUTER D = 64 MM |
002 | A 023 997 71 48 |
| 060 | REPAIR KIT BOOT |
002 | A 220 460 10 00 |
| 062 | COVER PLATE RACK-AND-PINION STEERING |
001 | A 220 466 02 38 |
| 063 | BOLT RACK-AND-PINION STEERING M6X10 |
002 | A 166 990 07 22 |
| 065 | HEXAGON NUT TIE ROD TO STEERING KNUCKLE M14X1.5 ORDER OBJECT NUMBER WITH ES1 98 AS OF IDENT. NO. A368544 |
002 | N 910113 014000 |
| 065 | HEXAGON NUT TIE ROD TO STEERING KNUCKLE M14X1,5 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | N 000000 003281 |
| 070 | THREADED PLATE STEERING TO CROSS MEMBER |
001 | A 220 463 03 86 |
| 075 | BOLT STEERING TO CROSS MEMBER M12X1.5X90 |
002 | A 011 990 05 01 |
| 080 | HEXAGON HEAD BOLT STEERING TO CROSS MEMBER M12X1.5X30 |
002 | N 910105 012007 |
| 085 | NUT STEERING TO CROSS MEMBER M12X1.5 |
004 | N 913023 012002 |
| 090 | STEERING COUPLING | 001 | A 220 460 03 10 |
| 093 | NUT STEERING COUPLING TO STEERING SHAFT M8 NOT INSTALLED IN VEHICLE WITH IDENT. NO.: A 391538 A 391997 |
001 | A 140 990 09 58 |
| 095 | HEXAGON HEAD BOLT STEERING COUPLING TO STEERING SHAFT M8X35 |
001 | N 910105 008014 |
| 110 | NUT STEERING COUPLING TO STEERING GEAR M8 |
001 | A 140 990 09 58 |
| 120 | BOLT STEERING COUPLING TO STEERING GEAR M8X39 |
001 | A 210 990 06 04 |
| 200 | VALVE REPAIR KIT |
001 | A 211 460 09 84 |
| 200 | VALVE REPAIR KIT |
001 | A 221 460 01 84 |
| 210 | REPAIR KIT FOR LONG OIL LINE, WITH O-RINGS |
001 | A 220 460 00 51 |
| 210 | REPAIR KIT FOR SHORT OIL LINE, WITH O-RINGS |
001 | A 220 460 04 51 |
| 220 | PLUG | 001 | A 210 988 01 28 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy