| №- | Name | A* | Part number | A |
|---|---|---|---|---|
BATTERY, STARTING CABLE |
- | XXX XXX XXX XXXX | - | |
| BATTERY, 12 V 84 AH | 001 | A 00 054 148 01 | - | |
| BATTERY, 12 V 66 AH | 001 | A 00 054 174 01 | - | |
| BATTERY, 12 V 84 AH TROPICAL VERSION SPECIAL REQUEST Replaced by: A 000 541 21 01 |
- | A 00 054 129 01 | - | |
| BATTERY, 12 V 84 AH TROPICAL VERSION SPECIAL REQUEST |
001 | A 00 054 121 01 | - | |
| BATTERY, 12 V 66 AH TROPICAL VERSION SPECIAL REQUEST |
001 | A 00 054 175 01 | - | |
| COLD-STARTING BATTERY FOR COUNTRIES WITH LOW TEMPERATURES SPECIAL REQUEST |
001 | A 00 054 160 01 | - | |
| MOUNTING FRAME Replaced by: A 111 540 00 23 |
- | A 12 154 001 23 | - | |
| MOUNTING FRAME Replaced by: A 110 540 04 23 |
- | A 12 054 009 23 | - | |
| MOUNTING FRAME | 001 | A 12 054 003 23 | - | |
| MOUNTING FRAME | 001 | A 12 054 007 23 | - | |
| 003 | TIGHTENING SCREW | 002 | A 12 054 101 24 | - |
| LOCK WASHER B 6 DIN 127 | 002 | N 000127 006200 | - | |
| HEX. NUT M 6 DIN 934-5 S | 002 | N 000934 006000 | - | |
| RUBBER HOSE, 20 MM LONG B 16X18 SW DIN 40 621 ABOVE ANGLE OF SUPPORTING RAIL, BATTERY Replaced by: A 180 997 15 82 |
- | - | ||
| RUBBER HOSE, 20 MM LONG ABOVE ANGLE OF SUPPORTING RAIL, BATTERY |
002 | A 18 099 715 82 | - | |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL |
007 | A 00 098 703 15 | - |
| REPLACED BY 120 540 07 30 FROM BATTERY POS. POLE TO STARTER MOTOR Replaced by: A 120 540 07 30 |
- | A 12 154 001 30 | - | |
| STARTING CABLE FROM BATTERY POS. POLE TO STARTER MOTOR Replaced by: A 120 540 07 30 |
- | A 12 054 006 30 | - | |
| STARTING CABLE FROM BATTERY POS. POLE TO STARTER MOTOR |
001 | A 13 654 014 30 | - | |
| STARTING CABLE FROM BATTERY POS. POLE TO STARTER MOTOR |
001 | A 12 154 003 30 | - | |
| STARTING CABLE FROM BATTERY POS. POLE TO STARTER MOTOR |
001 | A 12 054 006 30 | - | |
| STARTING CABLE FROM BATTERY POS. POLE TO STARTER MOTOR |
001 | A 13 654 014 30 | - | |
| RUBBER PROTECTIVE CAP FOR STARTING CABLE Replaced by: A 111 546 00 35 |
- | A 13 654 600 35 | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTING CABLE |
001 | A 11 154 600 35 | - |
| 008 | GROMMET STARTING CABLE THROUGH FIXING ANGLE, FRONT WALL |
001 | A 00 099 734 81 | - |
| GROMMET STARTING CABLE THROUGH ENGINE PARTITION PLATE |
001 | A 18 199 700 81 | - | |
| MOUNTING CLAMP STARTING CABLE TO MOUNTING, CONTROL SHAFT TO BODY FRONT END Replaced by: A 187 995 00 37 |
- | A 18 199 500 20 | - | |
| GROUND CABLE FROM BATTERY NEG. POLE TO ENGINE TO CLUTCH FLANGE Replaced by: A 120 540 12 31 |
- | A 18 054 000 31 | - | |
| GROUND CABLE FROM BATTERY NEG. POLE TO ENGINE TO CLUTCH FLANGE Replaced by: A 120 540 13 31 |
- | A 18 054 004 31 | - | |
| GROUND CABLE FROM BATTERY NEG. POLE TO ENGINE TO CLUTCH FLANGE |
001 | A 12 054 006 31 | - | |
| GROUND CABLE FROM BATTERY NEG. POLE TO ENGINE TO CLUTCH FLANGE |
001 | A 12 054 004 31 | - | |
| GROUND CABLE FROM BATTERY NEG. POLE TO ENGINE TO CLUTCH FLANGE |
001 | A 18 054 000 31 | - | |
| GROUND CABLE FROM STARTING FLANGE TO FRONT WALL |
001 | A 12 054 000 41 | - | |
| GROUND CABLE FROM STARTING FLANGE TO FRONT WALL |
001 | A 12 154 001 41 | - | |
| 013 | SCREW WITH LOCK PLATE GROUND CABLE TO TOEBOARD |
001 | A 12 042 002 27 | - |
| LOCK WASHER B 6 DIN 127 GROUND CABLE TO TOEBOARD |
001 | N 000127 006200 | - | |
| HEX. NUT M 6 DIN 934-5 S GROUND CABLE TO TOEBOARD |
001 | N 000934 006000 | - | |
| MAIN CABLE HARNESS Replaced by: A 120 540 37 05 |
- | A 12 054 033 05 | - | |
| MAIN CABLE HARNESS Replaced by: A 120 540 38 05 |
- | A 12 054 034 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 054 030 05 | - | |
| MAIN CABLE HARNESS Replaced by: A 120 540 39 05 |
- | A 12 054 035 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 054 039 05 | - | |
| MAIN CABLE HARNESS Replaced by: A 121 540 24 05 |
- | A 12 154 019 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 154 024 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 054 031 05 | - | |
| MAIN CABLE HARNESS Replaced by: A 120 540 40 05 |
- | A 12 054 036 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 054 040 05 | - | |
| MAIN CABLE HARNESS Replaced by: A 121 540 25 05 |
- | A 12 154 020 05 | - | |
| MAIN CABLE HARNESS | 001 | A 12 154 025 05 | - | |
| 016 | HOUSING, LOWER PART | 001 | A 00 054 506 28 | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - |
| 018 | CABLE BOOT | 002 | A 12 054 600 85 | - |
| 019 | PLUG FOR HEADLIGHT |
002 | A 00 054 408 86 | - |
| CABLE HARNESS IN JACKET TUBE |
001 | A 12 154 019 09 | - | |
| 020 | CABLE HARNESS IN JACKET TUBE |
001 | A 12 154 029 09 | - |
| CABLE HARNESS IN JACKET TUBE |
001 | A 12 154 020 09 | - | |
| CABLE HARNESS IN JACKET TUBE |
001 | A 12 154 026 09 | - | |
| CABLE HARNESS IN JACKET TUBE |
001 | A 12 154 021 09 | - | |
FOR TAIL LIGHTS |
001 | A 12 154 008 07 | - | |
| CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 12 054 003 08 | - | |
| 021 | CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 18 054 000 08 | - |
| 022 | GROMMET, MAKE HELLERMANN CABLE HARNESS FROM REGULATOR TO GENERATOR |
003 | A 00 099 707 81 | - |
| 023 | RUBBER PROTECTIVE CAP CABLE HARNESS TO GENERATOR |
002 | A 00 054 602 35 | - |
| MOUNTING CLAMP CABLE HARNESS TO GENERATOR |
001 | A 18 799 500 37 | - | |
| HOSE, 20 MM LONG CABLE HARNESS TO GENERATOR |
001 | A 00 099 747 82 | - | |
| LENS HEAD SHEET METAL SCREW B 3,9X9,5 DIN 7981 CABLE HARNESS TO GENERATOR |
001 | N 007981 003213 | - | |
| WASHER 4,3 DIN 125 CABLE HARNESS TO GENERATOR |
001 | N 000125 004300 | - | |
| CABLE HARNESS FROM CABLE CONNECTOR, 2 POLE, TO BACK-UP LIGHT SWITCH Replaced by: A 180 540 31 38 |
- | A 12 054 017 38 | - | |
| 024 | CABLE HARNESS FROM CABLE CONNECTOR, 2 POLE, TO BACK-UP LIGHT SWITCH |
001 | A 18 054 031 38 | - |
| MOUNTING CLAMP | 001 | A 18 699 502 20 | - | |
| 025 | BRACKET FOR CABLE HARNESS |
001 | A 18 054 600 43 | - |
| BRACKET FOR CABLE HARNESS |
001 | A 18 054 601 43 | - | |
| GROMMET CABLE HARNESS THROUGH BRACKET Replaced by: A 000 997 18 81 |
- | A 00 099 731 81 | - | |
| 026 | GROMMET CABLE HARNESS THROUGH BRACKET |
001 | A 00 099 718 81 | - |
| CABLE CONNECTOR, 5 POLE NOT INSTALLED |
- | A 00 054 606 41 | - | |
| 030 | CABLE CONNECTOR, 7 POLE CABLE HARNESS IN JACKET TUBE |
001 | A 00 054 664 41 | - |
| 031 | CABLE CONNECTOR, 5 POLE FOR CABLE HARNESS FOR TAIL LIGHTS |
002 | A 00 054 619 41 | - |
| LENS HEAD SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR |
010 | N 007981 003216 | - | |
| 037 | GROMMET MAIN CABLE HARNESS THROUGH FRONT WALL, BODY FRONT END, GLOVE COMPARTMENT |
001 | A 18 199 700 81 | - |
| 038 | GROMMET MAIN CABLE HARNESS THROUGH FRONT WALL, BODY FRONT END, GLOVE COMPARTMENT |
001 | A 00 099 737 81 | - |
| 038 | GROMMET MAIN CABLE HARNESS THROUGH FRONT WALL, BODY FRONT END, GLOVE COMPARTMENT |
002 | A 00 099 737 81 | - |
| 039 | GROMMET MAIN CABLE HARNESS THROUGH WHEEL ARCH |
002 | A 00 099 722 81 | - |
| 040 | MOUNTING CLIP MAIN CABLE HARNESS TO FRONT WALL AND WHEEL ARCH |
- | A 00 098 833 78 | - |
| 040 | MOUNTING CLIP MAIN CABLE HARNESS TO FRONT WALL AND WHEEL ARCH |
- | A 00 098 833 78 | - |
| MOUNTING CLIP MAIN CABLE HARNESS TO FRONT WALL AND WHEEL ARCH |
001 | A 00 098 834 78 | - | |
| MOUNTING CLIP MAIN CABLE HARNESS TO FRONT WALL AND WHEEL ARCH |
005 | A 00 098 834 78 | - | |
| MOUNTING CLIP MAIN CABLE HARNESS TO FRONT WALL AND WHEEL ARCH |
001 | A 00 098 853 78 | - | |
| INSULATING HOSE B 12X13,6X40 SW DIN 40 621 ORDER BY THE METER MAIN CABLE HARNESS TO WHEEL ARCH PANEL |
002 | N 040621 012200 | - | |
| 042 | MOUNTING CLAMP MAIN CABLE HARNESS TO FRONT WALL |
001 | A 13 699 500 37 | - |
| MOUNTING CLAMP MAIN CABLE HARNESS TO FRONT WALL |
001 | A 13 699 501 35 | - | |
| MOUNTING CLAMP MAIN CABLE HARNESS TO FRONT WALL |
001 | A 13 699 504 20 | - | |
| LENS HEAD SCREW A M 4X12 DIN 7985 MAIN CABLE HARNESS TO FRONT WALL |
001 | N 007985 004110 | - | |
| LOCK WASHER B 4 DIN 127 MAIN CABLE HARNESS TO FRONT WALL |
001 | N 000127 004200 | - | |
| LENS HEAD SCREW A M 6X15 DIN 7985 MAIN CABLE HARNESS TO FRONT WALL |
001 | N 007985 006108 | - | |
| LOCK WASHER B 6 DIN 127 MAIN CABLE HARNESS TO FRONT WALL |
001 | N 000127 006200 | - | |
| 043 | CAGE CLIP WITH NUT MAIN CABLE HARNESS TO FRONT WALL |
001 | A 00 099 022 91 | - |
| 044 | RUBBER HOSE ORDER BY THE METER ABOVE STARTING CABLE AND MAIN CABLE HARNESS |
003 | A 00 099 747 82 | - |
| MOUNTING CLIP FOR MAIN CABLE HARNESS |
002 | A 00 098 888 78 | - | |
| MOUNTING CLAMP MAIN CABLE HARNESS TO TOEBOARD |
002 | A 18 799 500 37 | - | |
| LENS HEAD SHEET METAL SCREW B Z 4,8X9,5 DIN 7981 MAIN CABLE HARNESS TO TOEBOARD |
001 | N 007981 004311 | - | |
| LENS HEAD SCREW A M 5X10 DIN 7985 MAIN CABLE HARNESS TO TOEBOARD |
001 | N 007985 005105 | - | |
| LOCK WASHER B 5 DIN 127 MAIN CABLE HARNESS TO TOEBOARD |
001 | N 000127 005200 | - | |
| 047 | MOUNTING CLAMP FOR MAIN CABLE HARNESS, STOP LIGHT AND FOOT DIMMER SWITCH |
001 | A 15 399 503 22 | - |
| LENS HEAD SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS, STOP LIGHT AND FOOT DIMMER SWITCH |
001 | N 007981 004211 | - | |
| 048 | MOUNTING CLAMP MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, FRONT, LEFT AND RIGHT |
001 | A 18 799 500 37 | - |
| MOUNTING CLAMP MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, FRONT, LEFT AND RIGHT |
002 | A 13 699 504 20 | - | |
| LENS HEAD SCREW A M 4X10 DIN 7985 MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, FRONT, LEFT AND RIGHT |
002 | N 007985 004105 | - | |
| LOCK WASHER B 4 DIN 127 MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, FRONT, LEFT AND RIGHT |
002 | N 000127 004200 | - | |
| 049 | MOUNTING CLAMP MAIN CABLE HARNESS TO CROSS MEMBER, FRONT |
002 | A 12 199 500 22 | - |
| HEX. HEAD SHEET METAL SCREW B 6,3X16 DIN 7976 MAIN CABLE HARNESS TO CROSS MEMBER, FRONT |
002 | N 007976 006201 | - | |
| MOUNTING CLIP FOR TAIL LIGHT CABLE HARNESS |
008 | A 00 098 833 78 | - | |
| MOUNTING CLIP FOR TAIL LIGHT CABLE HARNESS |
005 | A 00 098 834 78 | - | |
| 056 | BRACKET FOR TAIL LIGHT CABLE HARNESS |
008 | A 12 054 601 82 | - |
| TEROSTAT CABLE, 6-MM DIA, 50-MM LONG ORDER BY THE METER TAIL LIGHT CABLE HARNESS THROUGH WHEEL ARCH, REAR |
002 | A 00 098 946 85 | - | |
| 061 | CABLE COVER PLATE TO REAR CROSS MEMBER |
001 | A 12 054 600 81 | - |
| LENS HEAD SHEET METAL SCREW B 3,9X13 DIN 7981 TO REAR CROSS MEMBER |
001 | N 007981 003216 | - | |
| GROMMET FUEL TRANSMITTER CABLE IN LUGGAGE COMPARTMENT |
001 | A 00 099 718 81 | - | |
| LENS HEAD SHEET METAL SCREW B 4,8X9,5 DIN 7981 GROUND CABLE TRANSMITTER TO REAR CROSS MEMBER |
001 | N 007981 004211 | - | |
| LENS HEAD SCREW A M 4X10 DIN 7985 GROUND CONNECTION, TAIL LIGHT TO LUGGAGE COMPARTMENT |
002 | N 007985 004105 | - | |
| LOCK WASHER B 4 DIN 127 GROUND CONNECTION, TAIL LIGHT TO LUGGAGE COMPARTMENT |
002 | N 000127 004200 | - | |
| HEX. NUT M 4 DIN 934-5 S GROUND CONNECTION, TAIL LIGHT TO LUGGAGE COMPARTMENT |
002 | N 000934 004000 | - | |
Replaced by: A 121 540 00 50 |
- | A 18 054 009 50 | - | |
| FUSE BOX Replaced by: A 121 540 00 50 |
- | A 12 154 001 50 | - | |
| 071 | FUSE BOX | 001 | A 12 154 000 50 | - |
| COVER Replaced by: A 000 545 11 03 |
- | A 00 054 502 03 | - | |
| 072 | COVER | 001 | A 00 054 511 03 | - |
| FUSE 8 DIN 72 581 | 011 | N 072581 008000 | - | |
| FUSE 25 DIN 71 581 | 001 | N 072581 025000 | - | |
| LENS HEAD SCREW A M 4X12 DIN 85-4 S L CABLE TO FUSE BOX |
017 | N 000085 004106 | - | |
| TOOTHED WASHER J 4,3 DIN 6797 CABLE TO FUSE BOX |
017 | N 006797 004230 | - | |
| REPLACED BY 120 540 33 73 FOR FUSE BOX Replaced by: A 120 540 33 73 |
- | A 12 054 009 40 | - | |
| BRACKET, LOWER PART FOR FUSE BOX Replaced by: A 120 540 33 73 |
- | A 12 154 005 40 | - | |
| BRACKET, LOWER PART FOR FUSE BOX |
001 | A 12 054 033 73 | - | |
| BRACKET, UPPER PART FOR FUSE BOX |
001 | A 12 154 005 73 | - | |
| 074 | BRACKET FOR FUSE BOX |
001 | A 12 154 007 73 | - |
| 074 | BRACKET FOR FUSE BOX |
001 | A 12 154 007 73 | - |
| BRACKET FOR FUSE BOX |
001 | A 12 154 008 73 | - | |
| BRACKET FOR FUSE BOX |
001 | A 12 154 008 73 | - | |
| LENS HEAD SCREW A M 6X12 DIN 7985 BRACKET TO FRONT WALL |
002 | N 007985 006104 | - | |
| LOCK WASHER B 6 DIN 127 BRACKET TO FRONT WALL |
002 | N 000127 006200 | - | |
| LENS HEAD SHEET METAL SCREW B Z 3,9X19 DIN 7981 FUSE BOX TO BRACKET |
002 | N 007981 003308 | - | |
| SPREADER CLIP NUT FUSE BOX TO BRACKET |
002 | A 00 099 413 45 | - | |
| LENS HEAD SHEET METAL SCREW B Z 4,2X16 DIN 7981 FUSE BOX TO BRACKET |
002 | N 007981 004303 | - | |
| CLIP NUT FUSE BOX TO BRACKET |
002 | A 00 099 425 45 | - | |
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | |
| 080 | PUSH-PULL SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - |
| 081 | ESCUTCHEON FOR PUSH-PULL SWITCH |
001 | A 12 054 500 72 | - |
| 082 | FELT RING FOR PUSH-PULL SWITCH |
001 | A 00 099 720 40 | - |
| REPLACED BY 120 540 22 83 FOR PUSH-PULL SWITCH Replaced by: A 120 540 22 83 |
- | A 12 054 012 83 | - | |
| KNOB FOR PUSH-PULL SWITCH Replaced by: A 120 540 22 83 |
- | A 12 054 021 83 | - | |
| 083 | KNOB FOR PUSH-PULL SWITCH |
001 | A 12 054 022 83 | - |
| ROTARY PULL SWITCH FOR HEADLIGHTS, FOGLIGHTS AND CLEARANCE LIGHTS OPTIONAL Replaced by: A 110 540 02 58 |
- | A 11 054 000 58 | - | |
| 084 | ROTARY PULL SWITCH FOR HEADLIGHTS, FOGLIGHTS AND CLEARANCE LIGHTS OPTIONAL |
001 | A 11 054 002 58 | - |
| ROTARY PULL SWITCH FOR HEADLIGHTS, FOGLIGHTS AND CLEARANCE LIGHTS OPTIONAL Replaced by: A 110 540 03 58 |
- | A 11 054 001 58 | - | |
| ROTARY PULL SWITCH FOR HEADLIGHTS, FOGLIGHTS AND CLEARANCE LIGHTS OPTIONAL |
001 | A 11 054 003 58 | - | |
| CYLINDRICAL HEAD SCREW A M 4X6 DIN 84-4 S |
010 | N 000084 004101 | - | |
| TOOTHED WASHER | 010 | N 006797 004300 | - | |
| 085 | PROTECTIVE CAP CABLE HARNESS TO SWITCH |
001 | A 12 054 500 45 | - |
INSTRUMENT CLUSTERS |
- | XXX XXX XXX XXXX | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 Replaced by: A 120 542 36 01 |
- | A 10 554 205 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 Replaced by: A 120 542 39 01 |
- | A 10 554 206 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-15 Replaced by: A 120 542 37 01 |
- | A 10 554 208 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-15 Replaced by: A 120 542 38 01 |
- | A 10 554 207 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 Replaced by: A 120 542 40 01 |
- | A 12 154 203 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 Replaced by: A 120 542 41 01 |
- | A 12 154 201 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 Replaced by: A 120 542 28 01 |
- | A 12 054 211 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 |
001 | A 12 054 228 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 |
001 | A 12 054 232 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 Replaced by: A 120 542 33 01 |
- | A 12 054 208 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 |
001 | A 12 054 233 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-15 Replaced by: A 120 542 34 01 |
- | A 12 054 223 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-15 |
001 | A 12 054 234 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-15 Replaced by: A 120 542 35 01 |
- | A 12 054 222 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-15 |
001 | A 12 054 235 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN KILOMETERS, FOR TIRES 6.40-13 |
001 | A 12 054 221 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 |
001 | A 12 054 219 01 | - | |
| INSTRUMENT CLUSTER WITH INDICATION IN MILES, FOR TIRES 6.40-13 |
- | A 12 054 219 01 | - | |
| SPEEDOMETER FOR 121 542 03 01/120 542 40 01 Replaced by: A 003 542 47 06 |
- | A 00 154 243 06 | - | |
| SPEEDOMETER FOR 121 542 01 11/120 542 41 01 Replaced by: A 003 542 48 06 |
- | A 00 154 242 06 | - | |
| SPEEDOMETER FOR 120 542 11 01/120 542 28 01 |
001 | A 00 054 274 06 | - | |
| SPEEDOMETER FOR 120 542 32 01 |
001 | A 00 354 227 06 | - | |
| SPEEDOMETER FOR 120 542 08 01 |
001 | A 00 054 271 06 | - | |
| SPEEDOMETER FOR 120 542 33 01 |
001 | A 00 054 240 06 | - | |
| SPEEDOMETER FOR 120 542 23 01 |
001 | A 00 054 295 06 | - | |
| SPEEDOMETER FOR 120 542 22 01 |
001 | A 00 054 297 06 | - | |
| SPEEDOMETER FOR 120 542 34 01 |
001 | A 00 354 241 06 | - | |
| SPEEDOMETER FOR 120 542 35 01 |
001 | A 00 354 242 06 | - | |
| SPEEDOMETER FOR 120 542 21 01 |
001 | A 00 054 296 06 | - | |
| SPEEDOMETER FOR 120 542 19 01 |
001 | A 00 054 293 06 | - | |
| 088 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - |
TELETHERMOMETER |
001 | A 00 054 287 05 | - | |
| 089 | TELETHERMOMETER |
001 | A 00 154 244 05 | - |
| 090 | FUEL GAUGE | 001 | A 00 054 244 03 | - |
| 091 | LAMP SOCKET FOR INSTRUMENT CLUSTER |
005 | A 00 054 507 19 | - |
| BULB H 12 V 2 W DIN 72 601 FOR INSTRUMENT CLUSTER |
005 | N 072601 012800 | - | |
| 092 | TENSION SPRING FOR MOUNTING OF INSTRUMENT CLUSTER |
002 | A 12 099 317 10 | - |
| 093 | RUBBER FRAME FOR MOUNTING OF INSTRUMENT CLUSTER |
001 | A 12 054 202 80 | - |
| RUBBER HOSE FOR MOUNTING OF INSTRUMENT CLUSTER |
001 | A 12 099 707 82 | - | |
| 095 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - |
| MOUNTING CLIP FOR CABLE HARNESS |
002 | A 00 098 834 78 | - | |
| OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 007 60 | - | |
| 100 | OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 012 60 | - |
| OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 009 60 | - | |
| OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 010 60 | - | |
| OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 011 60 | - | |
| 101 | CABLE CONNECTOR FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 854 200 47 | - |
| OIL PRESSURE GAUGE LINE FROM INSTRUMENT CLUSTER TO HOSE, ENGINE |
001 | A 12 054 008 60 | - | |
| 103 | SPRING WASHER A 8 DIN 137 OIL PRESSURE GAUGE LINE AND HOSE TO BRACKET |
002 | N 000137 008100 | - |
| 104 | HEX. NUT B M 8 DIN 439-5 S OIL PRESSURE GAUGE LINE AND HOSE TO BRACKET |
001 | N 000439 008200 | - |
| RUBBER HOSE, 20-MM LONG ORDER BY THE METER OIL PRESSURE GAUGE LINE AND HOSE TO BRACKET |
001 | A 00 099 747 82 | - | |
| HOSE FROM OIL PRESSURE GAUGE LINE TO ENGINE |
001 | A 12 154 002 59 | - | |
| HOSE FROM OIL PRESSURE GAUGE LINE TO ENGINE |
001 | A 12 154 002 59 | - | |
| HOSE FROM OIL PRESSURE GAUGE LINE TO ENGINE |
001 | A 12 154 001 59 | - | |
| HOSE FROM OIL PRESSURE GAUGE LINE TO ENGINE |
001 | A 12 154 001 59 | - | |
| RUBBER HOSE, 25-MM LONG ORDER BY THE METER OIL PRESSURE GAUGE LINE AND CAPILLARY TUBE TO BODY FRONT END |
001 | A 00 098 700 32 | - | |
| MOUNTING CLAMP OIL PRESSURE GAUGE LINE AND CAPILLARY TUBE TO BODY FRONT END |
002 | A 13 699 505 01 | - | |
| LENS HEAD SHEET METAL SCREW B Z 3, 9X9, 5 DIN 7981 OIL PRESSURE GAUGE LINE AND CAPILLARY TUBE TO BODY FRONT END |
002 | N 007981 003313 | - | |
| BRACKET OIL PRESSURE GAUGE LINE AND CAPILLARY TUBE TO BODY FRONT END |
001 | A 12 054 217 40 | - | |
| GROMMET OIL PRESSURE GAUGE LINE, AND CAPILLARY TUBE THROUGH BRACKET, FUSE BOX |
001 | A 18 699 706 81 | - | |
| GROMMET OIL PRESSURE GAUGE LINE, AND CAPILLARY TUBE THROUGH BRACKET, FUSE BOX |
001 | A 18 699 705 81 | - | |
| GROMMET OIL PRESSURE GAUGE LINE, AND CAPILLARY TUBE THROUGH BRACKET, FUSE BOX |
001 | A 18 699 704 81 | - | |
| MOUNTING CLIP OIL PRESSURE GAUGE LINE TO BODY FRONT END |
006 | A 00 098 855 78 | - | |
| MOUNTING CLIP OIL PRESSURE GAUGE LINE TO BODY FRONT END |
001 | A 00 098 855 78 | - | |
| MOUNTING CLAMP CAPILLARY TUBE TO FRONT WALL |
002 | A 18 799 500 37 | - | |
| LENS HEAD SHEET METAL SCREW B 3, 9X9, 5 DIN 7981 CAPILLARY TUBE TO FRONT WALL |
002 | N 007981 003313 | - | |
| CABLE BRACKET 5X0, 3X135 N 286 A CAPILLARY TUBE TO HEATING HOSE |
001 | N 900286 005100 | - | |
| SEAL RING A 14X18 DIN 7603 A1 TELETHERMOMETER CONNECTION TO ENGINE |
001 | N 007603 014100 | - | |
| FLEXIBLE SHAFT, 1,820-MM LONG FOR SPEEDOMETER DRIVE Replaced by: A 105 542 00 07 |
- | A 12 054 203 07 | - | |
| 110 | FLEXIBLE SHAFT, 1,820-MM LONG FOR SPEEDOMETER DRIVE |
001 | A 10 554 200 07 | - |
| 111 | MOUNTING CLAMP FLEXIBLE SHAFT TO BEARING, CONTROL SHAFT |
001 | A 12 099 500 01 | - |
| LENS HEAD SCREW A M 5X10 DIN 7985 FLEXIBLE SHAFT TO BEARING, CONTROL SHAFT |
001 | N 007985 005105 | - | |
| LOCK WASHER B 5 DIN 127 FLEXIBLE SHAFT TO BEARING, CONTROL SHAFT |
001 | N 000127 005200 | - | |
| MOUNTING CLIP FLEXIBLE SHAFT TO PEDAL FLOOR |
002 | A 00 098 834 78 | - | |
| MOUNTING CLIP FLEXIBLE SHAFT TO PEDAL FLOOR |
001 | A 00 098 834 78 | - | |
| GROMMET FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 18 699 704 81 | - | |
| GROMMET FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL Replaced by: A 000 997 18 81 |
- | A 00 099 731 81 | - | |
| GROMMET FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 00 099 718 81 | - | |
| 112 | GROMMET FLEXIBLE SHAFT THROUGH FORK SUPPORT |
002 | A 18 099 712 81 | - |
| 112 | GROMMET FLEXIBLE SHAFT THROUGH FORK SUPPORT |
001 | A 18 099 712 81 | - |
| GROMMET FOR LOCKING 3RD OPENING AT FORK SUPPORT |
001 | A 18 098 700 44 | - | |
| CLOCK ELECTRIC Replaced by: A 120 542 07 11 |
- | A 12 054 206 11 | - | |
| 120 | CLOCK ELECTRIC |
001 | A 12 054 207 11 | - |
| LAMP SOCKET | 001 | A 00 054 507 11 | - | |
| BULB H 12 V 2 W DIN 72 601 |
001 | N 072601 012800 | - | |
| BUILT-IN SWITCH FOR BLINKER AND OVERTAKING SIGNAL LIGHT Replaced by: A 001 545 20 24 |
- | A 00 054 587 24 | - | |
| 123 | BUILT-IN SWITCH FOR BLINKER AND OVERTAKING SIGNAL LIGHT |
001 | A 00 154 520 24 | - |
| RESET SWITCH FOR BLINKER LIGHT |
001 | A 00 054 590 24 | - | |
| 124 | BLINKER LEVER KNOB DARD GRAPHITE GREY |
001 | A 18 054 504 37 | - |
| BLINKER LEVER KNOB IVORY COLORED |
001 | A 18 054 505 37 | - | |
| BLINKER TRANSMITTER | 001 | A 00 054 423 32 | - | |
| BRACKET | 001 | A 12 054 501 40 | - | |
| SPRING NUT FOR BLINKER SYSTEM |
001 | A 00 099 413 45 | - | |
| RELAY FOR BLINKER SYSTEM Replaced by: A 000 542 15 19 |
- | A 00 054 227 19 | - | |
| RELAY FOR BLINKER SYSTEM |
001 | A 00 054 215 19 | - | |
| CABLE, 80-MM LONG B 1 DIN 72 551 SW ORDER BY THE METER FOR RELAY FROM TERMINAL 30 TO 86 FOR BLINKER SYSTEM |
001 | N 072551 001880 | - | |
| CABLE TERMINAL 4X0, 8 N 261 FOR BLINKER SYSTEM |
003 | N 900261 004000 | - | |
| GROMMET FOR BLINKER SYSTEM |
003 | A 00 099 701 81 | - | |
| RELAY WITH MAKE AND BREAK CONTACT FOR BLINKER SYSTEM Replaced by: A 000 542 30 19 |
- | A 00 054 229 19 | - | |
| RELAY WITH MAKE AND BREAK CONTACT FOR BLINKER SYSTEM |
001 | A 00 054 230 19 | - | |
| BRACKET FOR RELAY FOR BLINKER SYSTEM |
001 | A 18 054 402 38 | - | |
| LENS HEAD SCREW A M 4X22 DIN 7985 RELAIS AN HALTER RELAY TO BRACKET RELAIS FOR BLINKER SYSTEM |
001 | N 007985 004119 | - | |
| LOCK WASHER B 4 DIN 127 RELAIS AN HALTER RELAY TO BRACKET RELAIS FOR BLINKER SYSTEM |
001 | N 000127 004200 | - | |
| HEX. NUT M 4 DIN 934-5 S RELAIS AN HALTER RELAY TO BRACKET RELAIS FOR BLINKER SYSTEM |
001 | N 000934 004000 | - | |
| ADDITIONAL CABLE HARNESS FOR BLINKER SYSTEM |
001 | A 12 054 023 09 | - | |
| REPLACED BY 000 545 26 41 FOR BLINKER SYSTEM Replaced by: A 000 545 26 41 |
- | A 00 054 645 41 | - | |
| CABLE CONNECTOR FOR BLINKER SYSTEM |
001 | A 00 054 626 41 | - | |
| CABLE | - | A 12 054 022 09 | - | |
| CABLE | - | A 12 054 022 09 | - | |
| CABLE FOR FOGLIGHTS |
- | A 12 054 020 38 | - | |
| CABLE FOR FOGLIGHTS |
- | A 12 054 020 38 | - | |
| INSULATING HOSE, 250-MM LONG B 6X0, 6 DIN 40 621 SW ORDER BY THE METER FOR FOGLIGHTS |
001 | N 040621 006200 | - | |
| FUSE BOX, 2 POLE FOR FOGLIGHTS |
001 | A 00 054 503 01 | - | |
| 131 | BRAKE LIGHT SWITCH | 001 | A 00 054 522 09 | - |
| FOOT DIMMER SWITCH BY MESSRS. KOSTAL OPTIONAL Replaced by: A 000 545 12 12 |
- | A 00 054 504 12 | - | |
| 132 | FOOT DIMMER SWITCH BY MESSRS. KOSTAL OPTIONAL |
001 | A 00 054 512 12 | - |
| FOOT DIMMER SWITCH BY MESSRS. BOSCH OPTIONAL Replaced by: A 000 545 11 12 |
- | A 00 054 508 12 | - | |
| FOOT DIMMER SWITCH BY MESSRS. BOSCH OPTIONAL |
001 | A 00 054 511 12 | - | |
| 133 | INSULATING PLATE FOR 000 545 04 12/08 12 FOOT DOMMER SWITCHES FOOT DIMMER SWITCH TO TOEBOARD |
001 | A 13 654 501 58 | - |
| LENS HEAD COUNTERSUNK SCREW B M 4X30 DIN 7988 FOOT DIMMER SWITCH TO TOEBOARD |
002 | N 007988 004217 | - | |
| 135 | CAGE CLIP WITH NUT FOOT DIMMER SWITCH TO TOEBOARD |
002 | A 00 099 025 91 | - |
| 136 | GROMMET FOOT DIMMER SWITCH TO TOEBOARD |
001 | A 00 099 727 81 | - |
STARTER SWITCH |
- | XXX XXX XXX XXXX | - | |
| GLOW STARTING SWITCH Replaced by: A 120 540 16 57 |
- | A 12 054 012 57 | - | |
| 160 | GLOW STARTING SWITCH | 001 | A 12 054 016 57 | - |
| GLOW STARTING SWITCH Replaced by: A 120 540 17 57 |
- | A 12 054 013 57 | - | |
| GLOW STARTING SWITCH | 001 | A 12 054 017 57 | - | |
| GLOW STARTING SWITCH | 001 | A 12 154 009 57 | - | |
| 161 | GLOW STARTING SWITCH | 001 | A 13 654 502 17 | - |
| 161 | GLOW STARTING SWITCH | 001 | A 13 654 502 17 | - |
| 162 | OCTAGON NUT | 001 | A 00 099 022 51 | - |
| 162 | OCTAGON NUT | 001 | A 00 099 022 51 | - |
Replaced by: A 120 540 23 83 |
- | A 12 054 013 83 | - | |
Replaced by: A 120 540 23 83 |
- | A 12 054 017 83 | - | |
| SWITCH HANDLE Replaced by: A 120 540 23 83 |
- | A 12 054 019 83 | - | |
| 163 | SWITCH HANDLE | 001 | A 12 054 023 83 | - |
Replaced by: A 120 540 24 83 |
- | A 12 054 014 83 | - | |
Replaced by: A 120 540 24 83 |
- | A 12 054 018 83 | - | |
| SWITCH HANDLE Replaced by: A 120 540 24 83 |
- | A 12 054 020 83 | - | |
| SWITCH HANDLE | 001 | A 12 054 024 83 | - | |
| SWITCH HANDLE | 001 | A 12 054 026 83 | - | |
Replaced by: A 120 545 02 83 |
- | A 12 054 500 83 | - | |
| KNOB Replaced by: A 120 545 02 83 |
- | A 12 054 501 83 | - | |
| 164 | KNOB | 001 | A 12 054 502 83 | - |
| 165 | LEVER FOR WIRE CABLE ACTUATION |
001 | A 12 054 007 78 | - |
| LEVER FOR WIRE CABLE ACTUATION |
001 | A 12 054 008 78 | - | |
| LEVER FOR WIRE CABLE ACTUATION |
001 | A 12 154 000 84 | - | |
| TOOTHED WASHER J 6,4 DIN 6797 PIN TO LEVER |
001 | N 006797 006240 | - | |
| TOOTHED WASHER J 6,4 DIN 6797 PIN TO LEVER |
001 | N 006797 006240 | - | |
| 166 | WASHER PIN TO LEVER |
001 | A 12 054 500 76 | - |
| 166 | WASHER PIN TO LEVER |
001 | A 12 054 500 76 | - |
| LOCK WASHER B 6 DIN 127 PIN TO LEVER |
001 | N 000127 006200 | - | |
| LOCK WASHER B 6 DIN 127 PIN TO LEVER |
001 | N 000127 006200 | - | |
| HEX. NUT M 6 DIN 934-5 S PIN TO LEVER |
001 | N 000934 006000 | - | |
| HEX. NUT M 6 DIN 934-5 S PIN TO LEVER |
001 | N 000934 006000 | - | |
| 167 | THRUST SPRING FOR GUIDE SLEEVE, LOCK SPRING |
001 | A 19 199 301 01 | - |
| 167 | THRUST SPRING FOR GUIDE SLEEVE, LOCK SPRING |
001 | A 19 199 301 01 | - |
| BALL 6 MM III DIN 5401 FOR GUIDE SLEEVE, LOCK SPRING |
001 | N 005401 306000 | - | |
| BALL 6 MM III DIN 5401 FOR GUIDE SLEEVE, LOCK SPRING |
001 | N 005401 306000 | - | |
| HEX. HEAD SCREW M 5X28 DIN 931-8 G LEVER TO SHIFTING SHAFT |
001 | N 000931 005005 | - | |
| HEX. HEAD SCREW M 5X28 DIN 931-8 G LEVER TO SHIFTING SHAFT |
001 | N 000931 005005 | - | |
| WASHER 5,3 DIN 433 LEVER TO SHIFTING SHAFT |
001 | N 000433 005300 | - | |
| WASHER 5,3 DIN 433 LEVER TO SHIFTING SHAFT |
001 | N 000433 005300 | - | |
| HEX. NUT M 5 DIN 934-5 S LEVER TO SHIFTING SHAFT |
001 | N 000934 005000 | - | |
| HEX. NUT M 5 DIN 934-5 S LEVER TO SHIFTING SHAFT |
001 | N 000934 005000 | - | |
| CYLINDRICAL PIN 4 M6X16 DIN 7 |
001 | N 000007 004103 | - | |
| CYLINDRICAL PIN 4 M6X16 DIN 7 |
001 | N 000007 004103 | - | |
| HEX. HEAD SCREW M 5X15 DIN 933-8 G |
001 | N 000933 005014 | - | |
| HEX. HEAD SCREW M 5X15 DIN 933-8 G |
001 | N 000933 005014 | - | |
| 168 | SPACER RING WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | A 13 654 500 52 | - |
| 168 | SPACER RING WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | A 13 654 500 52 | - |
| WASHER 5,3 DIN 433 WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000433 005300 | - | |
| WASHER 5,3 DIN 433 WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000433 005300 | - | |
| LOCK WASHER B 5 DIN 127 WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000127 005200 | - | |
| LOCK WASHER B 5 DIN 127 WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000127 005200 | - | |
| HEX. NUT M 5 DIN 934-5 S WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000934 005000 | - | |
| HEX. NUT M 5 DIN 934-5 S WIRE CABLE TO BRACKET, GLOW STARTING SWITCH |
001 | N 000934 005000 | - | |
| WASHER 5,3 DIN 433 WIRE CABLE TO LEVER, GLOW STARTING SWITCH |
001 | N 000433 005300 | - | |
| WASHER 5,3 DIN 433 WIRE CABLE TO LEVER, GLOW STARTING SWITCH |
001 | N 000433 005300 | - | |
| COTTER PIN 1,2X12 DIN 94 WIRE CABLE TO LEVER, GLOW STARTING SWITCH |
001 | N 000094 001201 | - | |
| COTTER PIN 1,2X12 DIN 94 WIRE CABLE TO LEVER, GLOW STARTING SWITCH |
001 | N 000094 001201 | - | |
| HEX. HEAD SCREW M 6X15 DIN 933-8 G BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
003 | N 000933 006204 | - | |
| HEX. HEAD SCREW M 6X15 DIN 933-8 G BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
003 | N 000933 006204 | - | |
| WASHER A 6,4 DIN 9021 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
001 | N 009021 006100 | - | |
| WASHER A 6,4 DIN 9021 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
001 | N 009021 006100 | - | |
| WASHER 6,4 DIN 433 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
NB | N 000433 006400 | - | |
| WASHER 6,4 DIN 433 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
NB | N 000433 006400 | - | |
| LOCK WASHER B 6 DIN 127 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
003 | N 000127 006200 | - | |
| LOCK WASHER B 6 DIN 127 BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT |
003 | N 000127 006200 | - | |
| 169 | RELEASE SPRING | 001 | A 13 699 314 10 | - |
| 169 | RELEASE SPRING | 001 | A 13 699 314 10 | - |
| 170 | GLOW STARTING SWITCH | 001 | A 00 054 513 17 | - |
| GLOW STARTING SWITCH | - | A 00 054 521 17 | - | |
| 171 | SPRING WASHER B 10 DIN 137 GLOW STARTING SWITCH TO STEERING COLUMN BRACKET |
001 | N 000137 010200 | - |
| 172 | HEX. NUT M 10X1 DIN 936-5 S GLOW STARTING SWITCH TO STEERING COLUMN BRACKET |
001 | N 000936 010002 | - |
| 173 | BUTTON | 001 | A 11 054 010 83 | - |
| 174 | BRACKET FOR WIRE CABLE AND LEVER |
001 | A 12 154 001 73 | - |
| 175 | LEVER FOR STARTER SAFE-GUARD OPERATION |
001 | A 12 154 500 22 | - |
| 176 | PIN 4 F8X25X22, 7 DIN 1434 LEVER TO BRACKET |
001 | N 001434 004003 | - |
| 177 | WASHER 4,3 DIN 125 LEVER TO BRACKET |
001 | N 000125 004300 | - |
| COTTER PIN 1X8 DIN 94 LEVER TO BRACKET |
001 | N 000094 001000 | - | |
| 178 | PIN 4 F8X16X13, 7 DIN 14341 WIRE CABLE TO GLOW STARTING SWITCH |
001 | N 001434 004001 | - |
| COTTER PIN 1X8 DIN 94 WIRE CABLE TO GLOW STARTING SWITCH |
001 | N 000094 001000 | - | |
| CYLINDRICAL HEAD SCREW A M 4X15 DIN 84-4 S WIRE CABLE TO BRACKET |
001 | N 000084 004110 | - | |
| WASHER B 4,3 DIN 9021 WIRE CABLE TO BRACKET |
002 | N 009021 004200 | - | |
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO BRACKET |
001 | N 000127 004200 | - | |
| HEX. NUT M 4 DIN 934-5 S WIRE CABLE TO BRACKET |
001 | N 000934 004000 | - | |
| MOUNTING CLIP FOR CABLE TO BRACKET |
001 | A 00 098 834 78 | - | |
| 185 | GLOW CONTROL BY MESSRS. BERU OPTIONAL |
001 | A 00 054 519 20 | - |
| 186 | GLOW SPIRAL OPTIONAL |
001 | A 00 054 506 21 | - |
| GLOW CONTROL BY MESSRS. BOSCH OPTIONAL |
001 | A 00 054 524 20 | - | |
| GLOW SPIRAL OPTIONAL |
001 | A 00 054 507 21 | - | |
| LENS HEAD SCREW A M 5X6 DIN 7985 DBL 8451-21 |
002 | N 007985 005123 | - | |
| SERIES RESISTANCE BY MESSRS. BERU OPTIONAL Replaced by: A 000 545 57 18 |
- | A 00 054 532 18 | - | |
| 190 | SERIES RESISTANCE BY MESSRS. BERU OPTIONAL |
001 | A 00 054 557 18 | - |
| GLOW PLUG RESISTO BY MESSRS. BOSCH OPTIONAL Replaced by: A 000 545 58 18 |
- | A 00 054 522 18 | - | |
| GLOW PLUG RESISTO BY MESSRS. BOSCH OPTIONAL |
001 | A 00 054 558 18 | - | |
| 191 | LENS HEAD SCREW A M 6X12 DIN 7985 SERIES RESISTANCE TO BODY FRONT END |
002 | N 007985 006104 | - |
| 192 | LOCK WASHER B 6 DIN 127 SERIES RESISTANCE TO BODY FRONT END |
002 | N 000127 006200 | - |
| CABLE FROM SERIES RESISTANCE, OR GLOW PLUG RESISTOR TO GLOW PLUG |
001 | A 12 054 001 38 | - | |
| 193 | CABLE FROM SERIES RESISTANCE, OR GLOW PLUG RESISTOR TO GLOW PLUG |
001 | A 12 154 017 38 | - |
| CABLE FROM SERIES RESISTANCE, OR GLOW PLUG RESISTOR TO GLOW PLUG |
001 | A 12 054 013 38 | - | |
Replaced by: A 001 542 51 20 |
- | A 00 054 227 20 | - | |
Replaced by: A 001 542 51 20 |
- | A 00 054 244 20 | - | |
Replaced by: A 001 542 51 20 |
- | A 00 054 271 20 | - | |
Replaced by: A 001 542 51 20 |
- | A 00 054 273 20 | - | |
Replaced by: A 001 542 51 20 |
- | A 00 054 207 20 | - | |
| HORN BY MESSRS. BOSCH OPTIONAL Replaced by: A 001 542 51 20 |
- | A 00 054 220 20 | - | |
| 195 | HORN BY MESSRS. BOSCH OPTIONAL |
001 | A 00 154 251 20 | - |
| HORN BY MESSRS. HELLA OPTIONAL |
001 | A 00 154 252 20 | - | |
| HEX. HEAD SCREW M 10X28 DIN 931-8 G HORN TO BRACKET |
001 | N 000931 010009 | - | |
| LOCK WASHER B 10 DIN 127 HORN TO BRACKET |
001 | N 000127 010200 | - | |
| HEX. NUT M 10 DIN 934-5 S HORN TO BRACKET |
001 | N 000934 010000 | - | |
| CYLINDRICAL HEAD SCREW A M 4X8 DIN 84-4 S CABLE CONNECTION TO HORN |
002 | N 000084 004103 | - | |
| LOCK WASHER B 4 DIN 127 CABLE CONNECTION TO HORN |
002 | N 000127 004200 | - | |
THREE-TONE SIGNAL SYSTEM, SPECIAL REQUEST |
- | XXX XXX XXX XXXX | - | |
| HORN, MEDIUM TONE | 001 | A 00 154 208 20 | - | |
| HORN, HIGH TONE Replaced by: A 001 542 23 20 |
- | A 00 054 246 20 | - | |
| HORN, HIGH TONE | 001 | A 00 154 223 20 | - | |
| BRACKET FOR HORN |
002 | A 12 054 223 40 | - | |
| HEX. HEAD SCREW M 10X28 DIN 931-8 G HORN TO BRACKET |
002 | N 000931 010009 | - | |
| LOCK WASHER B 10 DIN 127 HORN TO BRACKET |
002 | N 000127 010200 | - | |
| HEX. NUT M 10 DIN 934-5 S HORN TO BRACKET |
002 | N 000934 010000 | - | |
| HEX. HEAD SCREW M 6X15 DIN 933-8 G BRACKET TO WHEEL ARCH, LEFT |
001 | N 000933 006024 | - | |
| HEX. HEAD SHEET METAL SCREW B 5,5X13 DIN 7976 BRACKET TO WHEEL ARCH, LEFT |
001 | N 007976 005200 | - | |
| WASHER A 6,4 DIN 9021 BRACKET TO WHEEL ARCH, LEFT |
001 | N 009021 006100 | - | |
| LOCK WASHER B 6 DIN 127 BRACKET TO WHEEL ARCH, LEFT |
001 | N 000127 006200 | - | |
| HEX. NUT M 6 DIN 934-5 S BRACKET TO WHEEL ARCH, LEFT |
001 | N 000934 006000 | - | |
| CYLINDRICAL HEAD SCREW A M 4X8 DIN 84-4 S CABLE CONNECTION TO HORN |
004 | N 000084 004103 | - | |
| LOCK WASHER B 4 DIN 127 CABLE CONNECTION TO HORN |
004 | N 000127 004200 | - | |
| CONTACTOR Replaced by: A 000 542 15 19 |
- | A 00 054 227 19 | - | |
| CONTACTOR | 001 | A 00 054 215 19 | - | |
| PUSH-PULL SWITCH | 001 | A 00 054 506 11 | - | |
| ESCUTCHEON FOR PUSH-PULL SWITCH |
001 | A 12 054 500 72 | - | |
| FELT RING FOR PUSH-PULL SWITCH |
001 | A 00 099 720 40 | - | |
| REPLACED BY 120 540 22 83 FOR PUSH-PULL SWITCH Replaced by: A 120 540 22 83 |
- | A 12 054 012 83 | - | |
| BUTTON FOR PUSH-PULL SWITCH Replaced by: A 120 540 22 83 |
- | A 12 054 021 83 | - | |
| BUTTON FOR PUSH-PULL SWITCH |
001 | A 12 054 022 83 | - | |
| ADDITIONAL CABLE HARNESS | 001 | A 12 054 021 09 | - | |
| ADDITIONAL CABLE HARNESS | 001 | A 12 054 001 09 | - | |
| 200 | SOCKET | 001 | A 00 054 505 25 | - |
| 201 | BRACKET FOR SOCKET |
001 | A 12 054 511 95 | - |
| CYLINDRICAL HEAD SCREW A M 5X12 DIN 84-4 S BRACKET TO WHEEL ARCH |
002 | N 000084 005105 | - | |
| LOCK WASHER B 5 DIN 127 BRACKET TO WHEEL ARCH |
002 | N 000127 005200 | - | |
| HEX. NUT M 5 DIN 934-5 S BRACKET TO WHEEL ARCH |
002 | N 000934 005000 | - | |
| CABLE, 1,000-MM LONG A 1 DIN 72 551 SW ORDER BY THE METER |
001 | N 072551 001880 | - | |
| INSULATING HOSE, 950-MM LONG B 3X3,8 DIN 40 621 SW ORDER BY THE METER |
001 | N 040621 003200 | - | |
| 205 | HAND LIGHT FOR SOCKET IN ENGINE COMPARTMENT |
001 | A 00 058 307 19 | - |
| HAND LIGHT WITH PLUG CONNECTION AT CIGAR LIGHTER |
001 | A 00 058 315 19 | - | |
| BULB G 12 |
001 | N 072601 012701 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy