INJECTION PUMP

EPC / Mercedes / 1 / FG / FG 120.102 / 07 / 005
‹ ›

№- Name A* Part number A

INJECTION PUMP 		- XXX XXX XXX XXXX -
REPLACED BY
002 074 01 01 TOGETHER WITH 1 STOP ANGLE 636 074 02 40 UP TO ENGINE 5516035 		- A 00 007 493 02  -
INJECTION PUMP
Replaced by: A  002 074 01 01 		- A 00 107 454 01  -
001 INJECTION PUMP
FROM ENGINE 5516036 		001 A 00 207 401 01  -

Replaced by: A  002 074 02 01 		- A 00 107 434 01  -
INJECTION PUMP
Replaced by: A  002 074 02 01 		- A 00 107 477 01  -
INJECTION PUMP 001 A 00 207 402 01  -
STOP ANGLE
FOR CHOKE AND STOPPER CABLE AT INJECTION PUMP UP TO ENGINE 5516035 		001 A 63 607 401 40  -
002 STOP ANGLE
FOR CHOKE AND STOPPER CABLE AT INJECTION PUMP FROM ENGINE 5516036 		001 A 63 607 402 40  -
003 PRESSURE VALVE
WITH VALVE SUPPORT 		004 A 00 007 403 15  -
004 COIL SPRING
FOR PRESSURE VALVE 		004 A 00 007 416 93  -
SEALING RING
FOR PIPE CONNECTIONS
Replaced by: A  001 997 30 40 		- A 00 099 723 40  -
005 SEALING RING
001 997 3040 FOR PIPE CONNECTIONS 		004 -
006 PIPE CONNECTION
FOR PRESSURE VALVES 		004 A 00 007 800 69  -
CLAMPING JAW WITH THREAD
TO CLAMP PIPE CONNECTIONS
Replaced by: A  000 078 03 35 		- A 00 007 801 35  -
007 CLAMPING JAW WITH THREAD
TO CLAMP PIPE CONNECTIONS 		002 A 00 007 803 35  -
008 CLAMPING JAW
WITHOUT THREAD TO CLAMP PIPE CONNECTIONS 		002 A 00 007 802 35  -
COUNTERSUNK SCREW
AM 6X22 DIN 63-4 S FOR CLAMPINGJAWS 000 078 01 35/00 35 		002 -
CYLINDRICAL SCREW
BM 6X28 DIN 84-4 S FOR CLAMPINGJAWS 000 078 02 35/03 35 		002 -
LOCK WASHER
B 6 DIN 127 FOR CLAMPINGJAWS 000 078 02 35/03 35 		002 -
SEALING RING
A 6X10 DIN 7603 A1 FOR BREATHER SCREW 		002 -
BREATHER SCREW
ON INJECTION PUMP, FRONT SIDE
Replaced by: A  000 074 06 71 		- A 00 007 401 71  -
011 BREATHER SCREW
ON INJECTION PUMP, FRONT SIDE 		002 A 00 007 406 71  -
SEALING RING
A 10X14 DIN 7603 A1 FOR ANNULAR FITTING 		002 -
ANNULAR FITTING
B 4 DIN 7622 FOR OIL OVERFLOW 		001 -
HOLLOW SCREW
A 4 DIN 7623 TO FIX ANNULAR FITTING, FOR OIL OVERFLOW 		001 -
OIL DIPSTICK
Replaced by: A  000 074 13 60 		- A 00 007 410 60  -
017 OIL DIPSTICK 001 A 00 007 413 60  -
018 BREATHER FILTER
ON GOVERNOR 		001 A 00 007 500 32  -
SEALING RING
A 12X16 DIN 7603CU 		001 -
DIAPHRAGM
FOR GOVERNOR 		001 A 00 007 502 07  -
DIAPHRAGM
FOR GOVERNOR 		001 A 00 007 503 07  -
020 DIAPHRAGM
FOR GOVERNOR 		001 A 00 007 504 07  -

FUEL PUMP 		- XXX XXX XXX XXXX -
025 FUEL PUMP
WITHOUT PRE-FILTER 		001 A 00 009 141 01  -
026 VALVE
SUCTION AND PRESSURE VALVE 		002 A 00 009 100 10  -
027 PRESSURE SPRING
FOR SUCTION AND PRESSURE VALVE 		002 A 00 009 103 19  -
028 SCREW PLUG
FOR PRESSURE VALVE 		001 A 00 099 707 30  -
029 HAND PUMP
FOR FUEL PUMP 		001 A 00 009 111 01  -
SEALING RING
A 14X20 DIN 7603 A1 FOR HOLLOW SCREW 		002 -
HOLLOW SCREW
A 8 DIN 7623 FOR FUEL LINE AT FUEL PUMP 		001 -
035 GASKET
BETWEEN FUEL PUMP AND INJECTION PUMP 		001 A 00 009 105 80  -
WASHER
6,4 DIN 433 FOR FUEL PUMP AT INJECTION PUMP 		003 -
LOCK WASHER
B 6 DIN 127 FOR FUEL PUMP AT INJECTION PUMP 		003 -
HEX. NUT
M 6 DIN 934-5 S FOR FUEL PUMP AT INJECTION PUMP 		003 -
039 CONTROL LEVER
ON CONTROL SHAFT TO INJECTION PUMP 		001 A 00 007 427 27  -
LOCK WASHER
B 5 DIN 127 FOR CONTROL LEVER ON CONTROL SHAFT 		001 -
HEX.-HD.SCREW
M 5X15 DIN 933-8 G FOR CONTROL LEVER ON CONTROL SHAFT 		001 -
WOODRUFF KEY
2X3,7 DIN 6888 FOR CONTROL LEVER ON CONTROL SHAFT 		001 -
WASHER
5,3 DIN 433 OPTIONAL FOR CHOKE AND STOPPER CABLE AT CONTROL LEVER 		001 -
SPRING WASHER
5 N 55 A OPTIONAL FOR CHOKE AND STOPPER CABLE AT CONTROL LEVER 		001 -
COTTER PIN
1,5X12 DIN 94 FOR CHOKE AND STOPPER CABLE AT CONTROL LEVER 		001 -
WOODRUFF KEY
3X5 DIN 6888 		001 -
051 FOLLOWER
FOR INJECTION PUMP 		001 A 63 607 703 09  -
LOCK WASHER
B 12 DIN 127 FOR FOLLOWER AT INJECTION PUMP 		001 -
HEX. NUT
M 12 DIN 934-5 S FOR FOLLOWER AT INJECTION PUMP 		001 -
SEALING RING
A 12X16 DIN 7603 A1 		001 -
THREADED NIPPLE
6 DIN 7627 FOR CONNECTION OF VACUUM LINE BETWEEN INJECTION PUMP GOVERNOR AND MIXTURE CONTROLLER UP TO ENGINE 8500349 		001 -
056 GASKET
BETWEEN TIMING GEAR CASE COVER AND INJECTION PUMP 		001 A 63 607 404 80  -
WASHER
10,5 DIN 125 FOR INJECTION PUMP AT TIMING GEAR CASE COVER 		004 -
HEX. NUT
M 10 DIN 934-5 S FOR INJECTION PUMP AT TIMING GEAR CASE COVER 		004 -
GROOVED BEARING
16002 DIN 625 UP TO ENGINE 4500145 		002 -
GROOVED BEARING
6202 DIN 625 FROM ENGINE 4500146 		002 -
LOCKING RING
32X1,2 DIN 472 UP TO ENGINE 4500145 		002 -
LOCKING RING
35X1,5 DIN 472 FROM ENGINE 4500146 		002 -
DRIVE SHAFT
FOR INJECTION PUMP UP TO ENGINE 4505074 		001 A 63 607 702 05  -
DRIVE SHAFT
FOR INJECTION PUMP FROM ENGINE 4505075-5514611 		001 A 63 607 704 05  -
061 DRIVE SHAFT
FOR INJECTION PUMP FROM ENGINE 5514612 		001 A 63 607 705 05  -
SPACER TUBE
BETWEEN GROOVED BEARINGS ON DRIVE SHAFT UP TO ENGINE 4500145 		001 A 63 607 700 53  -
SPACER TUBE
BETWEEN GROOVED BEARINGS ON DRIVE SHAFT FROM ENGINE 4500146-4505074 		001 A 63 607 702 53  -
062 SPACER TUBE
BETWEEN GROOVED BEARINGS ON DRIVE SHAFT FROM ENGINE 4505075 		001 A 63 607 701 53  -
063 ADJUSTING RING
FOR DRIVE SHAFT FROM ENGINE 4505075-5514611 		001 A 63 607 701 52  -
WOODRUFF KEY
3X5 DIN 6888 FOR DRIVE GEAR, OR INJECTION TIMING GEAR RESP., AT DRIVE SHAFT 		001 -
DRIVE GEAR, 40 TEETH
FOR INJECTION PUMP UP TO ENGINE 5514611 		001 A 63 607 702 12  -
065 INJECTION TIMING GEAR
FROM ENGINE 5514612 		001 A 63 607 000 45  -
066 SEGMENT FLANGE
FROM ENGINE 5514612 		001 A 63 607 501 25  -
067 BALANCING WEIGHT
FROM ENGINE 5514612 		002 A 63 607 500 35  -
068 SEGMENT PLATE
FROM ENGINE 5514612 		001 A 63 607 500 25  -
PIN
FOR SPRING SEAT FROM ENGINE 5514612
Replaced by: A  621 075 02 74 		- A 63 607 501 74  -
069 PIN
FOR SPRING SEAT FROM ENGINE 5514612 		004 A 62 107 502 74  -
PRESSURE SPRING
FROM ENGINE 5514612
Replaced by: A  636 993 05 01 		- A 63 699 303 01  -
070 PRESSURE SPRING
FROM ENGINE 5514612 		002 A 63 699 305 01  -
PIN
FOR TIMING LIMIT FROM ENGINE 5514612
Replaced by: A  621 075 01 74 		- A 63 607 500 74  -
071 PIN
FOR TIMING LIMIT FROM ENGINE 5514612 		002 A 62 107 501 74  -
072 DRIVE GEAR
FROM ENGINE 5514612 		001 A 63 607 706 12  -

FROM ENGINE 5514612
Replaced by: A  636 075 03 50 		- A 63 607 000 54  -
BUSHING
FOR DRIVE GEAR FROM ENGINE 5514612
Replaced by: A  636 075 03 50 		- A 63 607 500 50  -
073 BUSHING
FOR DRIVE GEAR FROM ENGINE 5514612 		001 A 63 607 503 50  -
SPRING WASHER
B 8 DIN 137 FROM ENGINE 5514612 		004 -
HEX.-HD.SCREW
M 8X12 DIN 933-8 G FROM ENGINE 5514612 		004 -
076 THRUST WASHER
FROM ENGINE 5514612 		001 A 63 607 500 62  -
WASHER
13 DIN 125 FOR DRIVE GEAR, OR INJECTION TIMING GEAR RESP., AT DRIVE SHAFT 		001 -
LOCK WASHER
B 12 DIN 127 FOR DRIVE GEAR, OR INJECTION TIMING GEAR RESP., AT DRIVE SHAFT 		001 -
HEX. NUT
M 12X1,5 DIN 934-5 S FOR DRIVE GEAR, OR INJECTION TIMING GEAR RESP., AT DRIVE SHAFT 		001 -

UNIT PARTS FOR SUBSEQUENT INSTALLATION OF INJECTION TIMING GEAR 		- XXX XXX XXX XXXX -
UNIT PARTS
FOR SUBSEQUENT INSTALLATION OF INJECTION TIMING GEAR UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDIT 		001 A 63 607 000 99  -
INJECTION TIMING GEAR
UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 1 SPACER T 		001 A 63 607 000 45  -
THRUST WASHER
UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 1 SPACER T 		001 A 63 607 500 62  -
DRIVE SHAFT
UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 1 SPACER T 		001 A 63 607 705 05  -
COVER
UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 1 SPACER T 		001 A 63 601 505 30  -
WASHER
13 DIN 125 UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 		001 -
SHIM
UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 010 20 17 1 SPACER T 		001 A 63 609 204 20  -
HEX.-HD.SCREW
M 12X55 DIN 931-8 G UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 		002 -
FIXING SCREW
WITH TIMING NEEDLE UP TO ENGINE 4500145 THE FOLLOWING PARTS MUST BE DELIVERED IN ADDITION 1 TIMING GEAR CASE COVER 636 0 		001 A 63 601 502 71  -
WITH THE
FOLLOWING INSTALLED PARTS TO BE REMOVED: DRIVE SHAFT 636 077 04 05 DRIVE GEAR 636 077 02 12 COVER 636 015 01 30 HEX.-HD. 		- -
COUPLING SLEEVE
FOR INJECTION PUMP DRIVE UP TO ENGINE 4500145 		001 A 63 607 701 16  -
080 COUPLING SLEEVE
FOR INJECTION PUMP DRIVE FROM ENGINE 4500146 		001 A 63 607 702 16  -
081 SNAP RING
IN COUPLING SLEEVE 		001 A 63 699 401 35  -

NOZZLE HOLDER 		- XXX XXX XXX XXXX -
082 NOZZLE HOLDER
WITH INJECTION NOZZLE 		004 A 00 001 728 21  -
NOZZLE HOLDER BODY 004 A 00 001 731 21  -
THROUGH FITTING
FOR CONNECTION OF LEAK OIL LINE
Replaced by: A  000 017 06 54 		- A 00 001 704 54  -
083 THROUGH FITTING
FOR CONNECTION OF LEAK OIL LINE 		004 A 00 001 706 54  -
084 HEX. NUT
TO FIX THROUGH FITTING ON NOZZLE HOLDER BODY 		004 A 00 001 702 55  -
SHIM, 1.0 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 36 52 		- A 00 001 729 52  -
085 SHIM, 1.0 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 736 52  -
SHIM, 1.05 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 37 52 		- A 00 001 730 52  -
SHIM, 1.05 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 737 52  -
SHIM, 1.10 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 38 52 		- A 00 001 712 52  -
SHIM, 1.10 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 738 52  -
SHIM, 1.15 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 39 52 		- A 00 001 713 52  -
SHIM, 1.15 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 739 52  -
SHIM, 1.20 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 40 52 		- A 00 001 714 52  -
SHIM, 1.20 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 740 52  -
SHIM, 1.25 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 41 52 		- A 00 001 715 52  -
SHIM, 1.25 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 741 52  -
SHIM, 1.30 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 42 52 		- A 00 001 716 52  -
SHIM, 1.30 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 742 52  -
SHIM, 1.35 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 43 52 		- A 00 001 717 52  -
SHIM, 1.35 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 743 52  -
SHIM, 1.40 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 44 52 		- A 00 001 718 52  -
SHIM, 1.40 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 744 52  -
SHIM, 1.45 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 45 52 		- A 00 001 719 52  -
SHIM, 1.45 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 745 52  -
SHIM, 1.50 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 46 52 		- A 00 001 720 52  -
SHIM, 1.50 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 746 52  -
SHIM, 1.55 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 47 52 		- A 00 001 721 52  -
SHIM, 1.55 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 747 52  -
SHIM, 1.60 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 48 52 		- A 00 001 722 52  -
SHIM, 1.60 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 748 52  -
SHIM, 1.65 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 49 52 		- A 00 001 723 52  -
SHIM, 1.65 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 749 52  -
SHIM, 1.70 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 50 52 		- A 00 001 724 52  -
SHIM, 1.70 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 750 52  -
SHIM, 1.75 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 51 52 		- A 00 001 725 52  -
SHIM, 1.75 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 751 52  -
SHIM, 1.80 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE
Replaced by: A  000 017 52 52 		- A 00 001 726 52  -
SHIM, 1.80 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 752 52  -
SHIM, 1.85 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 753 52  -
SHIM, 1.90 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 754 52  -
SHIM, 1.95 MM THICK
FOR ADJUSTMENT OF INJECTION PRESSURE 		NB A 00 001 755 52  -
086 PRESSURE SPRING
IN NOZZLE HOLDER 		004 A 00 001 704 17  -
THRUST BOLT
IN NOZZLE HOLDER
Replaced by: A  000 017 02 74 		- A 00 001 701 74  -
087 THRUST BOLT
IN NOZZLE HOLDER 		004 A 00 001 702 74  -
NOZZLE HOLDER ELEMENT
Replaced by: A  000 017 01 22 		- A 00 001 700 22  -
088 NOZZLE HOLDER ELEMENT 004 A 00 001 701 22  -
089 BOX NUT
TO FIX INJECTION NOZZLE 		004 A 00 001 705 16  -
SEALING RING
A 8X12 DIN 7603 A1 FOR HOLLOW SCREW FOR LEAK OIL LINE AT NOZZLES 		008 -
HOLLOW SCREW
A 3 DIN 7623 FOR CONNECTION OF LEAK OIL LINE FOR LEAK OIL LINE AT NOZZLES 		004 -
092 INJECTION NOZZLE
IN NOZZLE HOLDER 		004 A 00 001 713 12  -
INJECTION NOZZLE
FOR ENGINES WITH AN ESPECIALLY STROG DIESEL KNOCK 		004 A 00 001 716 12  -
REPLACED BY
636 017 01 20 TOGETHER WITH 1 THREADED RING 636 017 03 03 UP TO ENGINE 5500957 		- A 31 201 704 20  -
093 GASKET
BETWEEN NOZZLE HOLDER AND PRECHAMBER FROM ENGINE 5500958 		004 A 63 601 701 20  -

PRESSURE AND LEAK PIPE 		- XXX XXX XXX XXXX -
100 PRESSURE PIPE, BENT
FOR CYLINDER 1 FROM INJECTION PUMP TO NOZZLE HOLDER 		001 A 63 607 032 33  -
101 PRESSURE PIPE, BENT
FOR CYLINDER 2 FROM INJECTION PUMP TO NOZZLE HOLDER 		001 A 63 607 033 33  -
REPLACED BY
636 070 34 33 TOGETHER WITH 1 PRESSURE LINE 636 070 35 33 UP TO ENGINE 7516775 		- A 63 607 030 33  -
102 PRESSURE PIPE, BENT
FOR CYLINDER 3 FROM INJECTION PUMP TO NOZZLE HOLDER FROM ENGINE 8516776 		001 A 63 607 034 33  -
REPLACED BY
636 070 35 33 TOGETHER WITH 1 PRESSURE LINE 636 070 34 33 UP TO ENGINE 8516775 		- A 63 607 031 33  -
103 PRESSURE PIPE, BENT
FOR CYLINDER 4 FROM INJECTION PUMP TO NOZZLE HOLDER FROM ENGINE 8516776 		001 A 63 607 035 33  -
104 PIPE CLAMP
FOR PRESSURE LINES 1, 2, 3 AND 4 UP TO ENGINE 4507500 		003 A 63 607 802 35  -
104 PIPE CLAMP
FOR PRESSURE LINES 1, 2, 3 AND 4 FROM ENGINE 4507501-6501468 		005 A 63 607 802 35  -
104 PIPE CLAMP
FOR PRESSURE LINES 1, 2, 3 AND 4 FROM ENGINE 6501469 		007 A 63 607 802 35  -
HEX. -HD. SCREW
M 5X12 DIN 933-8 G FOR PIPE CLAMP AT PRESSURE PIPE UP TO ENGINE 4507500 		003 -
HEX. -HD. SCREW
M 5X12 DIN 933-8 G FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 4507501-6501468 		005 -
HEX. -HD. SCREW
M 5X12 DIN 933-8 G FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 6501469 		007 -
LOCK WASHER
B 5 DIN 127 FOR PIPE CLAMP AT PRESSURE PIPE UP TO ENGINE 4507500 		003 -
LOCK WASHER
B 5 DIN 127 FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 4507501-6501468 		005 -
LOCK WASHER
B 5 DIN 127 FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 6501469 		007 -
HEX. NUT
M 5 DIN 934-5 S FOR PIPE CLAMP AT PRESSURE PIPE UP TO ENGINE 4507500 		003 -
HEX. NUT
M 5 DIN 934-5 S FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 4507501-6501468 		005 -
HEX. NUT
M 5 DIN 934-5 S FOR PIPE CLAMP AT PRESSURE PIPE FROM ENGINE 6501469 		007 -
PIPE BRACKET
FOR FUEL PIPE, CYLINDERS 1 AND 2, AT WATER PUMP
Replaced by: A  636 078 03 85 		- A 63 607 800 85  -
108 PIPE BRACKET
FOR FUEL PIPE, CYLINDERS 1 AND 2, AT WATER PUMP 		001 A 63 607 803 85  -
109 PIPE CLAMP
FOR PRESSURE PIPE 1 AND 2 AND VACUUM LINE AT WATER PUMP 		001 A 63 607 803 35  -
HEX. -HD.SCREW
M 5X12 DIN 933-8 G FOR PIPE CLAMP AT PIPE BRACKET AND WATER PUMP 		001 -
LOCK WASHER
B 5 DIN 127 FOR PIPE CLAMP AT PIPE BRACKET AND WATER PUMP 		001 -
HEX. NUT
M 5 DIN 934-5 S FOR PIPE CLAMP AT PIPE BRACKET AND WATER PUMP 		001 -
PIPE BRACKET
FOR FUEL PIPE, CYLINDER 1, 3 AND 4, AT EXHAUST MANIFOLD
Replaced by: A  636 078 02 85 		- A 63 607 801 85  -
113 PIPE BRACKET
FOR FUEL PIPE, CYLINDER 1, 3 AND 4, AT EXHAUST MANIFOLD UP TO ENGINE 6501468 		001 A 63 607 802 85  -
113 PIPE BRACKET
FOR FUEL PIPE, CYLINDER 1, 3 AND 4, AT EXHAUST MANIFOLD FROM ENGINE 6501469 		002 A 63 607 802 85  -
114 RUBBER PAD
FOR PRESSURE LINE, CYLINDERS 3 AND 4 FROM ENGINE 6501469 		001 A 63 607 800 86  -

Replaced by: A  636 070 12 35 		- A 63 607 010 35  -
LEAK LINE
Replaced by: A  636 070 12 35 		- A 63 607 011 35  -
115 LEAK LINE 001 A 63 607 012 35  -
BRACKET, T-FITTING
AT TIMING GEAR CASE COVER
Replaced by: A  636 070 01 40 		- A 63 607 000 40  -
BRACKET, T-FITTING
AT TIMING GEAR CASE COVER UP TO ENGINE 7507990 		001 A 63 607 001 40  -
116 BRACKET, T-FITTING
AT TIMING GEAR CASE COVER FROM ENGINE 7507991 		001 A 63 607 002 40  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA