| №- | Name | A* | Part number | A |
|---|---|---|---|---|
ENGINE |
- | XXX XXX XXX XXXX | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 Replaced by: A 121 010 72 00 |
- | A 12 101 026 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 |
001 | A 12 101 072 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 Replaced by: A 121 010 73 00 |
- | A 12 101 027 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 |
001 | A 12 101 073 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 Replaced by: A 121 010 89 00 |
- | A 12 101 055 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 |
001 | A 12 101 089 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 Replaced by: A 121 010 90 00 |
- | A 12 101 056 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION UP TO ENGINE 8513975 1 DOWEL PIN 180 991 01 62 (IN CLUTCH HOUSING) 1 |
001 | A 12 101 090 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION SPECIAL REQUEST FOR COUNTRIES WITH MORE THAN 2.000 M ABOVE SEA LEVEL |
001 | A 12 101 098 00 | - | |
| ENGINE, COMPLETE WITHOUT STARTER MOTOR, FAN, CLUTCH AND TRANSMISSION SPECIAL REQUEST FOR COUNTRIES WITH MORE THAN 2.000 M ABOVE SEA LEVEL |
001 | A 12 101 099 00 | - | |
CYLINDER CRANKCASE |
- | XXX XXX XXX XXXX | - | |
| REPLACED BY 121 010 35 08 TOGETHER WITH 1 CYLINDER HEAD GASKET 121 016 22 20 OR 121 016 19 20 RESPECTIVELY UP TO ENGINE 7500135 2 WA |
- | A 12 101 011 08 | - | |
| 001 | CYLINDER CRANKCASE WITH SIDE WALL CLOSED AT BOTH SIDES FROM ENGINE 8513976, DIA. 12 MM DOWEL PINS FROM ENGINE 8507471 |
001 | A 12 101 035 08 | - |
| LOCKING PLATE FOR CORE HOLES FROM ENGINE 8507471 UP TO 8510511 |
002 | B 25 N 59 5N59a | - | |
| LOCKING PLATE FOR CORE HOLES FROM ENGINE 9502226 |
001 | B 25 N 59 5N59a | - | |
| 002 | LOCKING PLATE FOR CORE HOLES FROM ENGINE 8510512 |
002 | B 30 N 59 0N59a | - |
| 003 | LOCKING PLATE FOR CORE HOLES FROM ENGINE 8507471 UP TO 8510511 |
004 | B 35 N 59 5N59a | - |
| 003 | LOCKING PLATE FOR CORE HOLES FROM ENGINE 8507471 UP TO 8510511 |
002 | B 35 N 59 5N59a | - |
| 003 | LOCKING PLATE FOR CORE HOLES FROM ENGINE 9502226 |
001 | B 35 N 59 5N59a | - |
| 004 | LOCKING PLATE FOR CORE HOLES FROM ENGINE 8510512 |
002 | B 40 N 59 0N59a | - |
| CRANKSHAFT BEARING CAP FOR 1ST AND 3RD CRANKSHAFT BEARING Replaced by: A 121 011 07 11 |
- | A 12 101 106 11 | - | |
| 005 | CRANKSHAFT BEARING CAP FOR 1ST AND 3RD CRANKSHAFT BEARING |
002 | A 12 101 107 11 | - |
| CRANKSHAFT BEARING CAP WITH TIGHTENING PIN FOR 2ND CRANKSHAFT BEARING Replaced by: A 121 010 09 23 |
- | A 12 101 008 23 | - | |
| 006 | CRANKSHAFT BEARING CAP WITH TIGHTENING PIN FOR 2ND CRANKSHAFT BEARING |
001 | A 12 101 009 23 | - |
| 007 | TIGHTENING PIN FOR 2ND CRANKSHAFT BEARING |
004 | A 12 199 100 41 | - |
| GUARD PLATE HALF 2.00MM FOR CRANKSHAFT BEARING CAP Replaced by: A 121 011 00 52 |
- | A 12 001 100 52 | - | |
| 008 | GUARD PLATE HALF 2.00MM STANDARD FOR CRANKSHAFT BEARING CAP |
002 | A 12 101 100 52 | - |
| GUARD PLATE HALF 2.05-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 01 52 |
- | A 12 001 101 52 | - | |
| GUARD PLATE HALF 2.05-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 101 52 | - | |
| GUARD PLATE HALF 2.10-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 02 52 |
- | A 12 001 102 52 | - | |
| GUARD PLATE HALF 2.10-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 102 52 | - | |
| GUARD PLATE HALF 2.15-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 03 52 |
- | A 12 001 104 52 | - | |
| GUARD PLATE HALF 2.15-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 103 52 | - | |
| GUARD PLATE HALF 2.20-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 04 52 |
- | A 12 001 103 52 | - | |
| GUARD PLATE HALF 2.20-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 104 52 | - | |
| GUARD PLATE HALF 2.25-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 05 52 |
- | A 12 001 105 52 | - | |
| GUARD PLATE HALF 2.25-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 105 52 | - | |
| GUARD PLATE HALF 2.30-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 06 52 |
- | A 12 001 106 52 | - | |
| GUARD PLATE HALF 2.30-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 106 52 | - | |
| GUARD PLATE HALF 2.35-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS Replaced by: A 121 011 07 52 |
- | A 12 001 107 52 | - | |
| GUARD PLATE HALF 2.35-MM THICK FOR CRANKSHAFT BEARING CAP FOR REPAIRS |
002 | A 12 101 107 52 | - | |
| 010 | WASHER FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
006 | A 12 199 012 40 | - |
| 011 | HEX. HEAD SCREW M 12X75 DIN 931 -10 K FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
005 | - | |
| 012 | SCREW FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
001 | A 12 101 100 71 | - |
| 013 | CYLINDRICAL PIN 10 M 6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
003 | - | |
| 014 | CYLINDRICAL PIN 8 M 6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
003 | - | |
| 015 | LOCKING PLATE FOR LOCKING TIMING MARK HOLE, CYLINDER CRANKCASE, REAR |
001 | B 25 N 59 5N59a | - |
| CYLINDRICAL PIN DIA. 8 X 26 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE UP TO ENGINE 8513975 |
001 | A 18 699 107 01 | - | |
| 016 | DOWEL PIN DIA. 12 X 34 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE FROM ENGINE 8513976 |
001 | A 18 099 100 60 | - |
| CYLINDRICAL PIN DIA. 8 X 16 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE UP TO ENGINE 8513975 |
001 | A 18 699 108 01 | - | |
| 017 | DOWEL PIN DIA. 12 X 20 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE FROM ENGINE 8513976 |
001 | A 18 099 101 60 | - |
| DOWEL PIN IN CASE OF CYLINDER CRANKCASE WITH DOWEL PIN DIA. 8-MM CLUTCH HOUSING WITH DOWEL PIN DIA. 12-MM INTERMEDIATE PLATE WITH |
001 | A 18 099 101 62 | - | |
| DOWEL PIN IN CASE OF CYLINDER CRANKCASE WITH DOWEL PIN DIA. 12-MM CLUTCH HOUSING WITH DOWEL PIN DIA. 8-MM AND INTERMEDIATE PLATE W |
001 | A 18 099 102 62 | - | |
| DOWEL PIN IN CASE OF CYLINDER CRANKCASE WITH DOWEL PIN DIA. 12-MM AND INTERMEDIATE PLATE WITH DOWEL PIN DIA. 8-MM RECESSED DIA. 12 |
001 | A 18 099 104 62 | - | |
| DOWEL PIN IN CASE OF CYLINDER CRANKCASE WITH DOWEL PIN DIA. 12.MM INTERMEDIATE PLATE WITH DOWEL PIN DIA. 8-MM CLUTCH HOUSING WITH |
001 | A 18 099 103 62 | - | |
| 018 | WATER DISTRIBUTOR UP TO ENGINE 7500135 |
002 | A 18 001 600 60 | - |
| 019 | WATER DISTRIBUTOR UP TO ENGINE 7500135 |
004 | A 18 001 601 60 | - |
| 021 | LOCKING SCREW M 16 X 1,5 DIN 906 -4 S FOR LOCKING OIL CHANNEL, FRONT AND REAR |
003 | - | |
| LOCKING SCREW FOR LOCKING OIL CHANNEL, FRONT AND REAR Replaced by: A 127 184 01 56 |
- | A 12 199 700 30 | - | |
| 022 | LOCKING SCREW FOR LOCKING OIL CHANNEL, FRONT AND REAR |
001 | A 12 718 401 56 | - |
| 023 | SEALING RING A 24X30 DIN 7603 AL FOR LOCKING OIL CHANNEL, FRONT AND REAR |
001 | - | |
| 025 | CYLINDRICAL PIN 10 M 6X14 DIN 7 FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
002 | - | |
| 026 | STUD BOLT M 8X30 DIN 939 10 K FOR TIGHTENING SCREW AT CYLINDER CRANKCASE |
001 | - | |
| 027 | STUD BOLT M 10X18 DIN 939-5 S FOR GENERATOR SUPPORT |
002 | - | |
CYLINDER SIDE COVER |
- | XXX XXX XXX XXXX | - | |
| 028 | CYLINDER SIDE COVER AT STARTER MOTOR SIDE UP TO ENGINE 8507470 |
001 | A 12 101 500 05 | - |
| 029 | GASKET FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, STARTER MOTOR SIDE UP TO ENGINE 8507470 |
001 | A 12 101 501 21 | - |
| HEX. HEAD SOCKET SCREW M 6X12 DIN 912-6 G FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, STARTER MOTOR SIDE UP TO ENGINE 8507470 |
019 | - | ||
| WASHER FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, STARTER MOTOR SIDE UP TO ENGINE 8507470 |
022 | A 18 099 010 40 | - | |
| HEX. HEAD SOCKET SCREW M 6X18 DIN 912-6 G FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, STARTER MOTOR SIDE UP TO ENGINE 8507470 |
003 | - | ||
| 030 | SUPPORT | 001 | A 12 107 003 24 | - |
| 031 | WASHER 6,4 DIN 125 ST FOR BEARING SUPPORT, DOUBLE LEVER AT CYLINDER CRANKCASE FROM ENGINE 8507471 |
003 | - | |
| 032 | HEX. HEAD SCREW M 6X15 DIN 933-8 G FOR BEARING SUPPORT, DOUBLE LEVER AT CYLINDER CRANKCASE FROM ENGINE 8507471 |
003 | - | |
| 034 | CYLINDER SIDE COVER WITH NIPPLE AT SPARK PLUG SIDE UP TO ENGINE 8507470 |
001 | A 12 101 003 10 | - |
| 035 | DISCHARGE VALVE CM 14 X 1,5 K DIN 71401 IN CYLINDER SIDE COVER, OR CYLINDER CRANKCASE RESP. |
001 | - | |
| 036 | GASKET FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, SPARK PLUG SIDE UP TO ENGINE 8507470 |
001 | A 12 101 502 21 | - |
| 037 | WASHER FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, SPARK PLUG SIDE UP TO ENGINE 8507470 |
018 | A 18 099 010 40 | - |
| 038 | HEX. HEAD SOCKET SCREW M 6X12 DIN 912-6 G FOR CYLINDER SIDE COVER AT CYLINDER CRANKCASE, SPARK PLUG SIDE UP TO ENGINE 8507470 |
018 | - | |
| 039 | COVER IN CYLINDER CRANKCASE, FRONT |
001 | A 18 001 101 33 | - |
| 040 | GASKET FOR COVER AT CYLINDER CRANKCASE |
001 | A 18 001 101 79 | - |
| 041 | HEX. HEAD SOCKET SCREW M 6X12 DIN 912-8 G FOR COVER AT CYLINDER CRANKCASE |
004 | - | |
| BEARING BUSHING FOR INTERMEDIATE GEAR SHAFT, REAR SEE ALSO GROUP 05 |
001 | A 18 005 210 06 | - | |
| BEARING WITH BUSHING FOR IGNITION DISTRIBUTOR AND OIL PUMP DRIVE SEE ALSO GROUP 15 |
001 | A 18 015 001 07 | - | |
| SAFETY PIN FOR FABRIC SEALING RING |
001 | A 18 699 100 55 | - | |
| 042 | SEALING RING A 6X10 DIN 7603 AL FOR LOCKING PASSAGE HOLE FOR SUPPORT, SERVO AGGREGATE FROM ENGINE 8507471 |
001 | - | |
| 043 | HEX. HEAD SCREW M 6X10 DIN 933-8 G FOR LOCKING PASSAGE HOLE FOR SUPPORT, SERVO AGGREGATE FROM ENGINE 8507471 |
001 | - | |
| 044 | SEALING RING A 8X12 DIN 7603-AL FOR LOCKING PASSAGE HOLE, STUD BOLT, CONTROL FROM ENGINE 8507471 |
001 | - | |
| 045 | HEX. HEAD SCREW M 8X10 DIN 933-8 G FOR LOCKING PASSAGE HOLE, STUD BOLT, CONTROL FROM ENGINE 8507471 |
001 | - | |
| INTERMEDIATE PLATE, FITTING HOLE 8-MM UP TO ENGINE 8513975 |
001 | A 18 001 106 05 | - | |
| INTERMEDIATE PLATE, FITTING HOLE 12-MM FOR CYLINDER CRANKCASE, STARTER MOTOR FROM ENGINE 8513976 Replaced by: A 180 011 11 05 |
- | A 18 001 113 05 | - | |
| 046 | INTERMEDIATE PLATE, FITTING HOLE 12-MM FOR CYLINDER CRANKCASE, STARTER MOTOR FROM ENGINE 8513976 |
001 | A 18 001 111 05 | - |
| 047 | HEX. HEAD SCREW M 10X15 DIN 933-8 G FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE UP TO ENGINE 8515018 |
002 | - | |
| 047 | HEX. HEAD SCREW M 10X15 DIN 933-8 G FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE FROM ENGINE 8515019 |
003 | - | |
| 048 | SPRING WASHER B 10 DIN 137 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE UP TO ENGINE 8515018 |
002 | - | |
| 048 | SPRING WASHER B 10 DIN 137 FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE FROM ENGINE 8515019 |
003 | - | |
OIL PAN |
- | XXX XXX XXX XXXX | - | |
| 050 | OIL PAN | 001 | A 12 101 010 13 | - |
| SAFETY PIN FOR FABRIC SEALING RING |
001 | A 18 699 100 55 | - | |
| 051 | GUIDE TUBE IN OIL PAN FOR OIL DIPSTICK |
001 | A 18 001 000 66 | - |
| SEALING RING FOR BREATHER FILTER Replaced by: A 198 997 00 40 |
- | A 18 099 700 40 | - | |
| 053 | SEALING RING FOR BREATHER FILTER |
001 | A 19 899 700 40 | - |
| 055 | OIL DIPSTICK WITH BREATHER FILTER |
001 | A 12 101 000 72 | - |
| 056 | SEALING RING C 26X32 DIN 7603 CU.ASB. FOR OIL DRAIN, OIL PAN |
001 | - | |
| 057 | LOCKING SCREW FOR OIL DRAIN, OIL PAN |
001 | A 13 699 712 30 | - |
| 058 | WASHER 6,4 DIN 433 FOR OIL PAN AT CYLINDER CRANKCASE |
018 | - | |
| 059 | HEX. -HD. SOCKET SCREW M 6X15 DIN 912- 6 G FOR OIL PAN AT CYLINDER CRANKCASE UP TO ENGINE 7500569 |
018 | - | |
| 059 | HEX. -HD. SOCKET SCREW M 6X15 DIN 912- 6 G FOR OIL PAN AT CYLINDER CRANKCASE FROM ENGINE 7500570 |
016 | - | |
| HEX. -HD. SOCKET SCREW M 6X25 DIN 912-6 G FOR OIL PAN AT CYLINDER CRANKCASE FROM ENGINE 7500570 UP TO ENGINE 8510120 |
002 | - | ||
| 060 | HEX. -HD. SOCKET SCREW M 6X60 DIN 912-8 G FOR OIL PAN AT CYLINDER CRANKCASE FROM ENGINE 8510121 |
002 | - | |
| 061 | WASHER 8,4 DIN 433 FOR OIL PAN AT CYLINDER CRANKCASE |
004 | - | |
| 062 | HEX. -HD. SOCKET SCREW M 8X30 DIN 912-8 G FOR OIL PAN AT CYLINDER CRANKCASE |
002 | - | |
| 063 | HEX. -HD. SOCKET SCREW M 8X90 DIN 912-8 G FOR OIL PAN AT CYLINDER CRANKCASE |
002 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy